MCM Electronics

GPIO AND FTDI Interface Expansion For Raspberry Pi By Ftdi (RPI-HUB-MODULE) MCM Part #83-16344

0 stars No reviews yet
$44.99 
This product currently has limited stock.

The RPI-HUB-MODULE is a USB HUB and USB to dual channel multi interface converter module designed for Raspberry Pi. It utilises an FT2232H USB to UART/MPSSE IC, along with a GL850G USB hub controller IC.

Specifications Top

The FT2232H based RPi HUB module is a USB to UART, 245FIFO, SPI, I2C, JTAG, GPIO interface expansion module targeted at allowing a Raspberry PI user to expand the number of interfaces. It can also be used as a HUB device or an FT2232H evaluation module. The module has a USB 2.0 high speed HUB chip which supports up to three external downstream USB ports. This module utilises the GL850G USB 2.0 HUB controller which provides a low cost and widely used USB 2.0 HUB solution, to provide up to 4 downstream USB ports. The GL850G is a single chip USB hub solution. The GL850G is a full function solution which supports both Individual/Gang power management modes and two color (green/amber) status LED.

Features
  • One standard USB type A plug to connect to the host
  • External power input connector available to supply external downstream USB ports
  • Support for USB suspend and resume
  • UART data transfer rates from 300baud to 12Mbaud at 3.3V TTL levels
  • Synchronous serial (MPSSE) data rates of up to 30Mbps on JTAG, SPI and I2C
  • Defaults to two independent UART interfaces
  • All I/O pins are 5V safe
  • UHCI/OHCI/EHCI host controller compatible
  • On board EEPROM 93LC56 for FT2232H configuration
  • USB 2.0 high speed compatible


Part Numbers
MCM Part #:83-16344
Ftdi Part #:RPI-HUB-MODULE
Package Specifications & Dimensions
Weight:0.09 lbs.
Hazardous:No
Warranty:90 days
Need to Return?
Length:3.35 in.
Width:1.34 in.
Height:0.63 in.
Shipping Information
Extra Shipping Charge:No
Drop Ship:No

Product Reviews Top