MCM Electronics

30000 Counts DC Milli-Ohm Meter 30m? ~ 3M? By GW Instek (GOM-802) MCM Part #72-12070

0 stars No reviews yet
& FREE Shipping
This item is Non Cancellable/Non Returnable

Specifications Top

The GOM-802 milliohm meter is designed for component and material resistance measurements in laboratories and other test environments. A large display with 30,000 counts and a superb accuracy of up to 0.05% gives the reliability and flexibility required in demanding measurement applications. Features such as Auto ranging, a built-in comparator offering Hi-Lo testing, a Limit Percent setting, and Go/NoGo testing reduce the effort for complex testing setups. Displayed selections of Relative, Actual, and % Value show results viewed from multiple perspectives. The GOM-802 supports 4 Wire Kelvin resistance measurements for faster accurate results. For an accurate, sophisticated, affordable milliohm meter, the GOM-802 is the right choice.

  • 30000 Counts Display
  • High Accuracy 0.05%
  • Hi/Lo Comparator and Limit Percent Setting
  • Measurement of REL, Actual and % Value
  • Continuous or Triggered Measurement Mode
  • Temperature Compensation and Measurement
  • Four-Terminal Measurement Technique
  • Auto-Recall Last Setting After Power OFF and ON Again
  • Alarm Setting for PASS/FAIL
  • Scan, Handler Interface(Standard)
  • Manual or Autoranging

Display 30000 Counts
Resistance Range/Test Current 30mΩ/1A, 300mΩ/100mA, 3Ω/100mA, 30Ω/10mA, 300Ω/1mA, 3kΩ/100uA, 30kΩ/100uA, 300kΩ/10uA and 3MΩ/1uA 9 ranges
Resistance Accuracy 30mΩ: ±1% reading + 6 digits
300mΩ: ±0.05% reading + 6 digits
3Ω: ±0.05% reading + 3digits
30Ω~3MΩ: ±0.05% reading + 2 digits
Resistance Resolution 1uΩ, 10uΩ, 100uΩ, 1mΩ, 10mΩ, 100mΩ, 1Ω, 10Ω, 100Ω
Temperature Range -50°C ~ 100°C
Temperature Accuracy -10°C ~ -40°C : 0.3%+0.5°C
Other : 0.3%+1.0°C
Resolution 0.1°C
Function Hi/Lo, Go/No-Go, Trigger, Actual, %, Diode, REL, Temp, TC for Transformer
Measuring Rate 7 measuring/sec at 30,000 counts
30 measuring/sec at 3,000 counts
Memory 20 Sets
Interface Standard: Handler, Scan (same connector)
Power Source AC 100V / 120V / 220V / 230V±10%, 50/60Hz
Dimensions 251(W)×91(H)×291(D) mm
Weight Approx. 3kg
Part Numbers
MCM Part #:72-12070
GW Instek Part #:GOM-802
Package Specifications & Dimensions
Weight:7.7 lbs.
Warranty:730 days
Need to Return?
Shipping Information
Extra Shipping Charge:No
Drop Ship:No

Product Reviews Top

Associated Products

Image of 4mm Test Leads with Removable Probe Covers and Right Angle Plugs

72-9340 - 4mm Test Leads with Removable Probe Covers and Right Angle Plugs

A pair of red and black test leads with right angled connection to shrouded 4mm sockets commonly found on hand-held test equipment. Flexible cable allows for easy placement.

On Backorder(Expected in 97 days)


Buy Now
Image of Short LCR Test Leads

73-1425 - Short LCR Test Leads

Includes one red and one black lead 5” Long sheathed banana to alligator clip Short length allows for accurate component measurements Used with LCR Meters and Capacitance Meters

In Stock


Buy Now
Image of Test Lead Set

76-108A - Test Lead Set

One red and one black 48" PVC flexible jacketed lead Sheathed right angle DMM plugs 0.08" (2mm) diameter contact tips Meets 1000V Cat III requirements 10A rating Includes slide-on alligator clip adapters

In Stock


Buy Now