MCM Electronics

3GHz Spectrum AnalyzerMCM Part #: 72-9870  |  GW Instek Part #: GSP-830

No reviews yet!
Login to rate or review this product

The GSP-830 3GHz Spectrum Analyzer features high performance, and remote monitoring software. This unit is capable of finding limits; Trace Detection and with it's easy-to-use interface, it's an ideal solution for spectrum analysis.

Product Description

  • Repeat or Single run mode can be used to streamline repetitive tasks
  • Easy PC connection with USB host/device, RS232C, VGA and GPIB (optional) for remote monitoring, control and analysis
  • Auto sequence mode to define macros in 10 sequence sets
  • Low Noise Floor(-117dBm@1GHz, 3k RBW)
  • Sequence Programming Functions
  • ACPR, OCBW, Channel Power, N-dB and Phase Jitter Measurements
  • 10 Markers with Delta Marker, Peak Functions
  • AC/DC/Battery(Option)three modes of power supply
  • USB/RS-232C/GPIB(Option) Interface
  • 6.4" TFT Color LCD, Resolution: 640x480
  • Includes owner's manual, power cord and USB cable

Specifications
Frequency
Frequency Range 9kHz ~ 3GHz
Aging Rate +/- 10ppm, 0~50°C, 5ppm/yr
Span Range 2kHz ~ 3GHz in 1-2-5 sequence, full span, zero span
Phase Noise -80dBc/Hz @1GHz 20kHz offset typical
Sweep Time Range 50ms ~ 25.6s
Resolution bandwidth
RBW Range 3kHz, 30kHz, 300kHz, 4MHz
RBW Accuracy 15%
Video Bandwidth Range 10Hz ~ 1MHz in 1-3 steps
Amplitude
Measurement Range -103dBm ~ +20dBm: 1MHz ~ 15MHz, Ref.Level @ -30dBm
-117dBm ~ +20dBm: 15MHz ~ 1GHz, Ref.Level ?-110dBm
-114dBm ~ +20dBm: 1GHz ~ 3GHz, Ref.Level ?-110dBm
(Span = 50kHz, RBW = 3kHz)
Overload Protection Max. +30dBm, +/-25VDC
Reference Level Range -110dBm ~ +20dBm
Accuracy +/-1dB @100MHz
Frequency Flatness +/-1dB
Display Range Linearity +/-1dB over 70dB
Dynamic range
Average Noise Floor <-135±1dBm/Hz: 1MHz ~ 15MHz, Ref.Level @ -30dBm
<-149dBm/Hz, typical -152dBm/Hz: 15MHz ~ 1GHz, Ref.Level ?-110dBm
<-146dBm/Hz, typical -149dBm/Hz: 1GHz ~ 3GHz, Ref.Level ?-110dBm
Third Inter-Modulation <-70dBc RF Input @-40dBm, Ref.Level @-30dBm
Harmonic Distortion <-60dBc RF Input <-40dBm Typical, Ref.Level @-30dBm
Non-Harmonic Spurious <-93dBm, 1MHz ~ 15MHz, Ref.Level @-30dBm
<-107dBm ~ +20dBm: 15MHz ~ 1GHz, Ref.Level ?-110dBm
<-104dBm ~ +20dBm: 1GHz ~ 3GHz, Ref.Level ?-110dBm
(Span = 50kHz, RBW = 3kHz)
General
Display 640 x 480 high resolution TFT color LCD
Split Windows Active Window: Upper, Lower or Alternate (two simultaneously sweeping windows)
Markers 10 Markers for peaks: 5 normal-delta marker pairs
Functions: Delta, To Peak, To Minimum, Peak Track, Peak Table, Peak Sort
Trace Detection 3 traces with Peak, Maximum hold, Freeze, Average, Trace math
Power Measurement ACPR, OCBW, Channel Power, N dB and Phase Jitter
Autoset Function Auto tuning the measurement result for observation
Trigger Conditions: Video, External (Positive-going, +5V TTL external signal)
Mode: Normal, Single, Continuous
Sequence Automated test by user-defined macros without any remote controller, 10 Sequential macro set and 10 macros per each set, Variable delays and wait-to-go facilitate automated measurement, Do-sequence links and nests different sequence sets.
Connectors
RF Input N female, 50O nominal
RF input VSWR: <2:1, @0dBm Reference Level
External Reference Type: BNC female
Clock Input 1M, 1.544M, 2.048M, 5M, 10M, 10.24M, 13M, 15.36M, 15.4M, 19.2MHz
Reference Clock Output Type: BNC female, 10MHz
DC Input (DC Power Operation) Jack : 5.5mm, 12V
DC Output Type: SMB Male, outputs +9V/100mA Max.
Interface
RS-232C Sub-D 9 pins female
USB Connector USB Host/Device full speed supported
VGA Output Front panel: Type A receptacle for USB flash devices
Option: GPIB Interface Fully programmable with IEEE 488.2 compliance
Power source AC 100 ~ 240V, 50/60Hz
Dimensions 13" (W) x 6.7" (H) x 13.4" (D) mm
Weight 13.2 lbs.

Product Reviews

  • Rate It!
    Be the first to rate this product!

    Login Here to rate and review this product.

Associated Products

Image of Oscilloscope/Test Equipment Cart

21-1925 - Oscilloscope/Test Equipment Cart

•Slanted top allows technician to view equipment at a convenient angle •Lower shelf for storage •Heavy-duty casters •Adjustable back support with bumpers prevents damage to equipment •Gray •

In Stock

$109.00

Buy Now
Image of

27-4235 - "N" male to BNC female

"N" male to BNC female.

In Stock

$2.99

Buy Now
Image of Swivel Base BNC Antenna

72-6601 - Swivel Base BNC Antenna

The Tenma swivel-base BNC telescopic antenna connects to most frequency counters, spectrum analyzers and other RF test equipment with BNC input. This antenna is also compatible with most scanners with BNC connections.

On Backorder(Expected in 30 days)

$9.99

Buy Now
Package Specifications & Dimensions
Hazardous:No
RoHS Comp:No
Warranty:90 days
Need to Return?
Length:0 in.
Width:0 in.
Height:0 in.
Shipping Information
Extra Shipping Charge:No
Drop Ship:No
Catalog Pages
Catalog/Page:

MCM Cat 57, Page 1259

MCM Cat 56, Page 1095

PDF Reference
Datasheet

Requires Adobe Acrobat Reader.

Mfr. Info

GW Instek Logo
Mfr. Name:GW Instek
Mfr. Part Number:GSP-830