Galileo is designed to support shields that operate at either 3.3V or 5V. The core operating voltage of Galileo is 3.3V. However, a jumper on the board enables voltage translation to 5V at the I/O pins. This provides support for 5V Uno shields and is the default behavior. By switching the jumper position, the voltage translation can be disabled to provide 3.3V operation at the I/O pins.
Of course, the Galileo board is also software compatible with the Arduino Software Development Environment (IDE), which makes usability and introduction a snap. In addition to Arduino hardware and software compatibility, the Galileo board has several PC industry standard I/O ports and features to expand native usage and capabilities beyond the Arduino shield ecosystem. A full sized mini-PCI Express slot, 100Mb Ethernet port, Micro-SD slot, RS-232 serial port, USB Host port, USB Client port, and 8MByte NOR flash come standard on the board.
400 MHz 32-bit Intel® Pentium® instruction set
architecture (ISA)-compatible processor
8 MByte Legacy SPI Flash to store firmware (bootloader)
and the latest sketch
- 16 KByte L1 cache
- 512 KBytes of on-die embedded SRAM
- Simple to program: Single thread, single core,
- ACPI compatible CPU sleep states supported
- Integrated Real Time Clock (RTC), with optional 3V
“coin cell” battery for operation between turn on
512 KByte embedded SRAM
256 MByte DRAM
Optional micro SD card offers up to 32 GByte of storage
USB storage works with any USB 2.0 compatible drive
11 KByte EEPROM programmed via the EEPROM library
- Between 256 KByte and 512 KByte dedicated for
|MCM Part #:||83-15683|
|Intel Part #:||E000037|
|Package Specifications & Dimensions|
Need to Return?
|Extra Shipping Charge:||No|