MCM Electronics

Liquid Flux for Lead Free SolderingMCM Part #: 20-4476  |  Chemtronics Part #: CW3220

Liquid Flux for Lead Free Soldering 4.8 stars from 3 reviews.
Login to rate or review this product

The quart-sized container offers a convenient package size for small OEM's and board repair shops. The Lead-Free Flux applies a non-corrosive, halide-free No Clean flux, that meets the Bellcore Standard TR-NWT-000078 and passes the IPC specification SF-818 for surface insulation resistance (SIR). The instant wetting action of the Lead-Free Flux provides thorough deoxidation of metal surfaces, leaving the best possible surface for solder to metal bonding.

Product Description

  • Flux is non-corrosive and halide-free
  • Can be used for soldering with lead-free or tin/lead solders
  • Excellent material compatibility
  • Fast drying
  • RoHS Compliant
  • High thermal stability
  • 32 fl. oz. (1 quart) liquid

    CircuitWorks® Lead-Free Flux can be used in all soldering operations, including:
  • Printed Circuit Boards
  • Chip Carriers
  • Surface mount Device Pads
  • Switches and Sockets

  • Product Reviews

    • "Liquid Flux" by tremorman45 on 4/13/2013
      Overall: 5 out of 5
      Value:
      Quality:

      works great and helps soldering

    • "Workhorse Flux" by DrDerzzle on 8/12/2012
      Overall: 4.5 out of 5
      Value:
      Quality:

      The CW3220 flux is excellent for smaller operations and nearly as good as my reference flux (Kester 2331-ZX). The cost is about the same at the price tag level, except that the Kester is only available in ridiculously expensive pen form, or in 1gal/5gal/55gal quantities, where the shipping and ORMD charges more than double it. At 1L, Chemtronics manages to avoid that charge, though I believe you are still limited to ground shipping. This flux works great with both thru-hole and hand-soldered SMD, including the prototype boards from Schmartboard (just make sure to have a superfine tip and 750F+ with power... I use either Metcal or Tenma 9360/Xytronic LF2000). Cleaning is a breeze afterwards with slight bath in IPA and a gentle once over with brush; leaves no sticky residue. Solder flow and wetting is above average to great, using either Sb/Cu, Sn/Ag/Cu or even Sn/Pb. Personally, my chemistry selection is somewhat restricted by an allergic sensitivity to specific VOC even in low concentration. The Kester and this are the only two so far that I can freely use without a mask or active ventilation and not end up with hives.

    • "Prefect" by lunchboxrts on 2/9/2010
      Overall: 5 out of 5
      Value:
      Quality:

      if your doing any smd de/soldering or any de/soldering then this works great!

    • Rate It!

      Login Here to rate and review this product.

    Associated Products

    Image of Rosin Core Solder - 60/40 Tin/Lead - 1LB

    21-1040 - Rosin Core Solder - 60/40 Tin/Lead - 1LB

    Rosin Core Solder(one pound) Ideal for general purpose electronic repair and assembly use. Tin/lead formulation provides the lowest possible melting point.

    On Backorder(Expected in 107 days)

    $24.99

    Buy Now
    Image of Lint Free Cotton Wipes

    21-1080 - Lint Free Cotton Wipes

    High-quality, high-technology cleaning pads Made of specially woven lint-free cotton Specially designed thread weave traps and holds dirt particles away from surface being cleaned Static free Solvent and acid resistant 100 per bag

    In Stock

    $9.99

    Buy Now
    Image of Disposable Vinyl Gloves

    21-7130 - Disposable Vinyl Gloves

    •Industrial grade disposable 5 mil lightly powdered vinyl •Great general purpose glove, commonly used for food handlers •Size: Large •100 per box

    In Stock

    $7.19

    Buy Now

    Others Also Bought

    Image of Universal TV Stand, For Televisions 32

    50-14795 - Universal TV Stand, For Televisions 32" ~ 60"

    Universal Television Stand This universal TV stand is perfect for flat panel televisions that were mounted to the wall, but are to be moved to tabletop use. Universal mounting plate attaches to all VESA standard sets from 200x200 through 600x400, and provides a ...

    In Stock

    $59.99

    Buy Now
    Image of 10MM Headphones White High Performance Earbud

    35-5155 - 10MM Headphones White High Performance Earbud

    High Performance Earbud Headphones White Lightweight, stylish, high performance earbuds give crystal clear sound as well as a comfortable fit. Ideal for use with CD, MP3, MP4 and any other small portable audio players.

    In Stock

    $1.59

    Buy Now
    Package Specifications & Dimensions
    Weight:1.87 lbs.
    Hazardous:Yes
    Warranty:90 days
    Need to Return?
    Length:8 in.
    Width:5.5 in.
    Height:2 in.
    Shipping Information
    Extra Shipping Charge:No
    Drop Ship:No
    Catalog Pages
    Catalog/Page:

    MCM Cat 57, Page 1167

    MCM Cat 56, Page 982

    PDF Reference
    MSDS

    Requires Adobe Acrobat Reader.

    Mfr. Info

    Chemtronics Logo
    Mfr. Name:Chemtronics
    Mfr. Part Number:CW3220