MCM Electronics

Single Target IR Repeater Kit with White or Gold Peephole Style ReceiverMCM Part #: 50-13365  |  Knoll Systems Part #: IR-PEEP

No reviews yet!
Login to rate or review this product

Ideal for controlling A/V products that may be hidden in a closet, enclosed in a cabinet, or in a different room, this infrared repeater kit includes everything you need for a basic installation.

  • IR receiver color: Gold body with gold or white interchangeable trim rings

Product Description

Includes:

  • Infrared receiver: Peephole receiver is ideal for custom installation, such as behind the grill of an in-wall speaker, or in a door, and includes interchangeable gold or white trim rings, and it is CFL proof and plasma friendly
  • Connection block: Allows for connection of up to four emitters, and 10 infrared receivers
  • Infrared emitters: Each kit includes two dual infrared emitters
  • Power supply: 12VDC, 200mA power supply will power up to 5 infrared receivers

Receiver specifications:

  • Ships with brass and white bezel
  • Extremely small package, only 2 inches deep x 1/2" diameter
  • Works in normal 3-wire mode
  • 30-80 kHz reception
  • 50 feet (15m) reception distance
  • Nominal reception angle: 45 degrees off axis
  • Cable requirements for long lengths: three-conductor/24 gauge wire up to 200', 22 gauge up to 600', 20 gauge up to 2000' and 18 gauge up to 5000' (unshielded OK)
  • Maximum cable length: One mile with 18 gauge
  • Maximum current output: 100 milliamps
  • Maximum number of directly driven IR emitters: Up to four connected in series or up to four dual emitters when using Knoll IR55 connection block
  • Power requirements: 12 volts DC @ 25 milliamps Requires PS1202 or PS1205 Power Supply

Connection block specifications:

  • Connects four emitter ports and power supply to up to 10 Knoll infrared receivers
  • Four parallel emitter ports with 470 Ohm resistors drive 4 single or 4 dual emitters
  • 2.1 mm coaxial power jack
  • Uses either the PS1202 or PS1205 power supply
  • Dimensions: 2.65" x 2.9" x 1.1"

Infrared emitter specifications:

  • Two emitters connected to a single 3.5 mm mono mini plug
  • Two each low output and medium output in same unit
  • Clear adhesive film included on emitter housing for attachment to IR window of controlled component
  • Length of each wire: 10 feet (3 m). Wires are shipped bonded together at 9.5 feet (2.8 m) and can be separated back to 6.7 feet (2 m) as desired

Product Reviews

  • Rate It!
    Be the first to rate this product!

    Login Here to rate and review this product.

Others Also Bought

Image of 75' Active In-Wall High Speed HDMI Cable

24-14730 - 75' Active In-Wall High Speed HDMI Cable

Now you can reach further form your digital source to your high resolution HD display with this HDMI cable with built-in repeater.

In Stock

$46.99

Buy Now
Package Specifications & Dimensions
Weight:0.94 lbs.
Hazardous:No
RoHS Comp:Yes
Warranty:365 days
Need to Return?
Length:7 in.
Width:4.5 in.
Height:4.5 in.
Shipping Information
Extra Shipping Charge:No
Drop Ship:No
Catalog Pages
Catalog/Page:

MCM Cat 57, Page 305

MCM Cat 56, Page 016

Mfr. Info

Knoll Systems Logo
Mfr. Name:Knoll Systems
Mfr. Part Number:IR-PEEP