MCM Electronics

Share your feedback with us

Single Target IR Repeater Kit with Black Postage Stamp ReceiverMCM Part #: 50-13370  |  Knoll Systems Part #: IR-POST-B

No reviews yet!
Login to rate or review this product

Ideal for controlling A/V products that may be hidden in a closet, enclosed in a cabinet, or in a different room, this infrared repeater kit includes everything you need for a basic installation.

  • IR receiver color: Black

Product Description

Includes:

  • Infrared receiver: Approximately the same footprint as a postage stamp, this IR receiver offers stealthy installation in any environment, and it is CFL proof and plasma friendly
  • Connection block: Allows for connection of up to four emitters, and 10 infrared receivers
  • Infrared emitters: Each kit includes two dual infrared emitters
  • Power supply: 12VDC, 200mA power supply will power up to 5 infrared receivers

Receiver specifications:

  • Very small package, 138" x 138" x 05" " deep (35 x 35 x 15 mm) with 6' (2m) wire
  • Works in normal 3-wire mode
  • Blue talkback LED indicates infrared reception
  • CFL proof and plasma friendly
  • 30-80 kHz reception
  • 30 feet reception distance
  • Nominal reception angle: 45 degrees off axis
  • Cable requirements for long lengths: three-conductor/24 gauge wire up to 200', 22 gauge up to 600', 20 gauge up to 2000' and 18 gauge up to 5000' (unshielded OK)
  • Maximum cable length: One mile with 18 gauge
  • Maximum current output: 100 milliamps
  • Maximum number of directly driven IR emitters: Up to four connected in series or up to four dual emitters when using Knoll IR54 or IR55 connection block
  • Power requirements: 12 volts DC @ 25 milliamps Requires PS1202 or PS1205 Power Supply

Connection block specifications:

  • Connects four emitter ports and power supply to up to 10 Knoll infrared receivers
  • Four parallel emitter ports with 470 Ohm resistors drive 4 single or 4 dual emitters
  • 2.1 mm coaxial power jack
  • Uses either the PS1202 or PS1205 power supply
  • Dimensions: 2.65" x 2.9" x 1.1"

Infrared emitter specifications:

  • Two emitters connected to a single 3.5 mm mono mini plug
  • Two each low output and medium output in same unit
  • Clear adhesive film included on emitter housing for attachment to IR window of controlled component
  • Length of each wire: 10 feet (3 m). Wires are shipped bonded together at 9.5 feet (2.8 m) and can be separated back to 6.7 feet (2 m) as desired

Product Reviews

  • Rate It!
    Be the first to rate this product!

    Login Here to rate and review this product.

Others Also Bought

Image of 64GB 2.5

83-13111 - 64GB 2.5" Solid State Hard Drive

Make your computer boot and run faster than ever with this solid state hard drive.

In Stock

$89.99

Buy Now
Image of HDMI 1.3 1x4 Splitter

33-10542 - HDMI 1.3 1x4 Splitter

Split one HDMI source to distribute to multiple high-definition displays. Ideal for retail displays, entertainment venues, and multiple residential displays. Extends the range of HDMI compliant device by equalizing and boosting the HDMI signal up to an additional ...

In Stock

$124.63

Buy Now
Image of 3D Ready HDMI 1x4 Splitter

33-11055 - 3D Ready HDMI 1x4 Splitter

Enhanced amplified signals for longer cable runs HDMI / HDCP compliant Supports high-resolution displays of UXGA, 480i, 480p, 720p, 1080i, 1080p Secure HDMI connection with integrated cable retention bracket Multiple amplifiers can be cascaded for additional high ...

In Stock

$249.26

Buy Now

Keywords Associated with This Product

VeriSign Secured McAfee SECURE sites help keep you safe from identity theft, credit card fraud, spyware, spam, viruses and online scams
Package Specifications & Dimensions
Weight:0.85 lbs.
Hazardous:No
RoHS Comp:Yes
Warranty:365 days
Need to Return?
Length:7 in.
Width:5.25 in.
Height:3.5 in.
Shipping Information
Extra Shipping Charge:No
Drop Ship:No
Catalog Pages
Catalog/Page:MCM Cat 55, Page 016
MCM Cat 54, Page 000

Mfr. Info

Knoll Systems Logo
Mfr. Name:Knoll Systems
Mfr. Part Number:IR-POST-B