It is compatible with AP’s and other equipment supporting the IEEE standard PoE pinout (Pins 4&5 Power + / Pins 7&8 Power -).
Power-over-Ethernet eliminates the need for an AC outlet at each AP location. Only a single Ethernet cable is run to each AP instead of separate power and data cables. The injector is typically installed near the Ethernet hub.
This unit can be used as either an "Injector" or as a "Tap". When used as an injector the device sends DC power through the Ethernet cable to a remote PoE device. When used as a "Tap" this unit taps the injected DC power from the Ethernet cable for use by certain non-PoE devices.
Integral Surge Protection
The integral lightning and surge protection individually protects the 4 data lines as well as protection for the power lines. High speed devices clamp any voltage, positive or negative on the wires. The limits are +/- 15 volts on pins, 1, 2, 3, 6 and +/- 58 volts on pins, 4, 5, 7 and 8.
The BT-CAT5-P1-4848 features shielded RJ45 jacks. This along with the BT-CAT5-P1's metal housing helps reduce the effects of EMI interference. A ground lug and terminal is provided directly on the injector housing providing superior grounding. The cast aluminum housing includes integral mounting feet for ease of installation.
This kit includes the injector/tap and a 48VDC @ 48W power supply (PS4848-25R).
- Wireless LAN Access Points and Bridges
- IP Surveillance Cameras
- Wired Switches
- Wireless LAN Amplifiers
Additional POE Injector Units
Midspan High Power Injector Kit with 48VDC @ 48 W Power Supply
Midspan Injector Kit
Midspan Injector Kit with 48VDC @ 48 W Power Supply
- CAT5e and CAT5 compatibility, GR-1089 Intra-Building rated
- Surge Protection on all lines
- Cable shield isolated from safety ground
- Up to 60 volts DC or AC power
- Includes 48VDC @ 48 Watt Power Supply
|MCM Part #:||831-3577|
|L-com Part #:||BT-CAT5-P1-4848|
|Package Specifications & Dimensions|
Need to Return?
|Extra Shipping Charge:||No|