Popular OEM replacement for Sansui, Sanyo, Fisher, Curtis Mathes and many other speaker systems. Copper voice coil on ASV former provides above average power capacity.
I ordered a couple of these to replace some sealed back mids in some old 80s style "monkey coffin" stereo towers.. These exceeded my expectations, I actually had to pad them down just a little to match the lower efficiency of the old woofers... I measured these mids using a very accurate reference microphone capsule along with TrueRTA software and the graph that was generated was almost perfectly identical to the curve that MCM makes available.. Ideally these are probably best used with at least a second order crossover in order to protect the driver and increase power handling, but since i was using these padded down in a low powered system i used a simple 1st order high pass (series poly cap) and they sound great... I also do believe that these could make fun & low-cost miniature midrange line arrays for PA use if you place 4 of them vertically as close together as possible and wire them in series-parallel, it would get you a respectable 99db @1w efficiency levels with 200w rms power handling, and great vertical pattern control.. Not bad at all for barely over 20 dollars!
This makes a nice replacement, Just make sure you have room for the plate that surrounds the driver it is all one piece. Nice tone and good power handling.
looked for a long time for replacements for my Fisher stv-722 &stv-420 speakers. these are a perfect fit and sound just like orginals if not better.
This midrange does have excelent features. It does have 94 dB SPL as advertized. I used a 12 dB xover at 900 Hz to be clear of nonlinearities close to the 700 Hz resonance. I will buy more. Be careful of the paper cone as this is very delicate, protect it!
Login Here to rate and review this product.
50-4475 - Heavy Duty Speaker Binding Post Set
Gold plated binding posts are ideal for demanding speaker enclosure applications where thick walls prohibit the use of conventional cup terminals. Extended thread length is perfect for enclosures of up to 1" thick. To install, simply drill a 1/4" hole&...
28-955 - Double Sided Foam Tape
Thousands of uses Fasten accessories to car dash, etc. 3/4" x 61/2' roll
80-6875 - VHS Head Cleaner
VCR Head Cleaner safely and effectively cleans tape heads and entire tape path Non-abrasive
Exclusive cleaning material prevents debris from re-depositing on heads
MCM Cat 57, Page 171
MCM Cat 56, Page 298
Requires Adobe Acrobat Reader.
I have always had the best of service and response from MCM. Highly recommended!