This high quality dome tweeter is perfect for repair, upgrade, or new speaker construction, and is ideal for pro sound cabinets.
I had hoped to use these for my bass cabinets from here on out, but I've recently discovered that I won;t be able to. I build my cabinets with 1.5" thick baffles, and these will only work with a .75" baffle or less. Because of the terminal notches hanging off the magnet, in order to install these, you must cut notches into your cutout to accommodate them. Because the notches hang directly under the screwholes, you must turn the horn once you've installed it, otherwise your screws will have nowhere to screw into, and you'll have an air leak. This is impossible in my situation because the baffles I use are too thick.
These probably sound pretty good, and are probably a great deal, but if you build your cabs like I build mine, these are a no-go. I'll probably pop them in some floor monitors and post a proper review then, I just wanted to get this out these so people know.
Requires Adobe Acrobat Reader
LS00385 - Acoustic Wadding Material
Made of white polyester fiber, this is perfect for internal speaker enclosure dampening, this wadding provides the perfect solution to eliminating problematic low frequency internal resonance. This material is a must for any speaker building or upgrade pro...
555-27200 - 12AX7 / ECC83 Preamp Tube JJ
12AX7 / ECC83 Preamp Tube
This tube has a well balanced, colorful tone with strongly defined lows and mids, and smooth highs. It allows for more clean head-room than higher gain 12AX7's. In overdrive it is smooth and strong, and offers clean distortion with well ...
108-3301 - 3/16 Inch I.D. Heat Shrink Tubing Spool
General purpose, flexible polyolefin tubing in 100 ft rolls is perfect for electrical insulation over connectors,splices and wire bundling.2:1 shrink ratio. Black in color. UL listed.
22-24430 - 20 Piece Faster Kit with Assorted Bits
Magnetic drive guide includes a set of popular bits.
As always, MCM came through with great pricing on quality products.......