MCM Electronics

1" Soft Dome Tweeter with 103mm Round FrameMCM Part #: 53-1370  |  MCM Audio Select Part #: 53-1370

1" Soft Dome Tweeter with 103mm Round Frame 4.1 stars from 4 reviews.
Login to rate or review this product

1” Soft Dome Tweeter
This high-quality dome tweeter is perfect for repair, upgrade, or new speaker construction. Perforated steel mesh cover provides protection to the sensitive soft dome, perfect in prosound and automotive environments.

Product Description

    Specifications:
  • Power capacity: 30W/60W RMS/peak
  • Voice coil: 1”
  • Sensitivity: 90dB (W/M)
  • Frequency response: 1,500Hz~20KHz
  • Impedance: 8ohm
  • Overall frame diameter: 4-1/8”
  • Cutout diameter: 3” (requires notch for solder tabs)
  • Depth: 1”

Product Reviews

  • "potentially very good tweeter--but consistent quality from one to the next is bad" by litekeys on 7/31/2014
    Overall: 2.5 out of 5
    Value:
    Quality:

    I have bought and used many of these, and find they can be excellent. But you have to test each one to make sure it is up to spec. About half are not.

    I use the same quality Brian Smith woofer tester that I have used for over a decade (MCM used to sell these) to run impedance plots. These plots are just as telling as EKGs are to one's heart. Normally the should show an impedance peak at about 1500 Hz. But many don't. Some are a half an octave higher or lower--which is a lot. And some have double peaks and some tiny blip rises. These are bad things to see.

    The ones that are on spec can be very, very good--as good as almost any--especially with a good crossover with good film capacitors. With canned crossovers using np electrolytic caps, they can sound just as hissy and spitty as any lousy tweeter.

  • "very good!!!" by turbo1976 on 11/21/2013
    Overall: 5 out of 5
    Value:
    Quality:

    great speaker for a great price!!!

  • "great tweeter" by moebuster on 5/15/2013
    Overall: 4.5 out of 5
    Value:
    Quality:

    used these in a rare set of Radian Research 10-3's near perfect fit and blends nicely with the metal mesh on the mids and port cover.great sound and a bargin.

  • "Unbeatable for the money" by rojo26 on 2/16/2013
    Overall: 4.5 out of 5
    Value:
    Quality:

    Ridiculously cheap and sounds very good.

  • Rate It!

    Login Here to rate and review this product.

Associated Products

Image of 3M™ Black Strip-Caulk - Box of 60 - 1' Lengths

108-3190 - 3M™ Black Strip-Caulk - Box of 60 - 1' Lengths

Soft, non-hardening caulking material for use in all types of seams, joints and openings. This caulk can easily be thumbed into place and smoothed with finger. Non-sag consistency makes it ideal for vertical and overhead applications.

In Stock

$15.99

Buy Now
Image of Heavy Duty Speaker Binding Post Set

50-4475 - Heavy Duty Speaker Binding Post Set

Gold plated binding posts are ideal for demanding speaker enclosure applications where thick walls prohibit the use of conventional cup terminals. Extended thread length is perfect for enclosures of up to 1" thick. To install, simply drill a 1/4" hole&...

In Stock

$7.99

Buy Now

Others Also Bought

Image of 15

55-2953 - 15" Woofer with Paper Cone and Cloth Surround - 200W RMS at 8ohm

15" Paper Cone Woofer Low cost general replacement woofer is ideal in a two way cabinets or as a subwoofer. It is perfect for prosound applications and is ideal in ported or sealed enclosures.,/p> Also available in 4Ohm Version

In Stock

$31.49

Buy Now
Image of 6 1/2

55-2970 - 6 1/2" Woofer with Poly Cone and Rubber Surround 50W RMS at 8ohm

6.5" Polypropylene Cone Woofer Low cost general replacement woofer is ideal in a two way cabinets or as a compact subwoofer. It is perfect for a wide variety of home or autosound applications and is ideal for either ported or sealed enclosures. Also available i...

In Stock

$7.39

Buy Now
Image of 1

53-1080 - 1" Soft Dome Tweeter 30W RMS

This high quality dome tweeter is perfect for repair, upgrade, or new speaker construction. 30W/60W RMS/peak Impedance: 8ohm Sensitivity: 92dB Frequency response: 1.5KHz~20KHz Required cutout: 3" diameter plus notches for connectors Mounting depth: 1¼" ...

In Stock

$4.99

Buy Now
Package Specifications & Dimensions
Weight:1.14 lbs.
Hazardous:Yes
RoHS Comp:Yes
Warranty:90 days
Need to Return?
Length:4.5 in.
Width:4.5 in.
Height:1.5 in.
Shipping Information
Extra Shipping Charge:No
Drop Ship:No
Catalog Pages
Catalog/Page:

MCM Cat 57, Page 178

MCM Cat 56, Page 305

Mfr. Info

MCM Audio Select Logo
Mfr. Name:MCM Audio Select
Mfr. Part Number:53-1370