MCM Electronics

Bullet Piezo Horn Driver By MCM Audio Select (53-810) MCM Part #53-810

2.5 stars 3 reviews
MSRP: $9.95
You Save: $8.16 (82 %)
Qty.Volume Price

Ideal for use with any standard midrange/tweeter horn lens. Screw-on horn driver utilizes standard 13/8" x 18TPI threads for compatibility with most available drivers. Commonly used in musical instrument and DJ speaker systems, this driver provides wide dispersion, ideal in sound reinforcement applications. Piezoelectric design offers excellent transient response, high efficiency and very high immunity to burnout. Very high impedance at low frequencies eliminates the need for a crossover, making this a very inexpensive and reliable tweeter to incorporate into any speaker system. It is perfect for direct incorporation into multi tweeter arrangements.

Specifications Top

  • Power capacity: 75W/150W RMS/max
  • Frequency response: 2KHz~20KHz
  • Diameter: 21/2"
    Part Numbers
    MCM Part #:53-810
    MCM Audio Select Part #:53-810
    Package Specifications & Dimensions
    Weight:0.13 lbs.
    Warranty:365 days
    Need to Return?
    Length:3.25 in.
    Width:3 in.
    Height:2.5 in.
    Shipping Information
    Extra Shipping Charge:No
    Drop Ship:No
  • Product Reviews Top

    • by elitegang

      on 4/26/2015


      Overall: 1 out of 5
      Quality: mid quality at all. touches 2k which tiny tim is below in frequency.

    • by jbird604

      on 3/10/2013

      Surprisingly good sound and you can't beat the price

      Overall: 4.5 out of 5

      I mated these with Selenium horns with a 600 Hz cutoff, and sure got a lot of sound out of them. Piezos get a bad rap for not having a flat-line response curve, but the irregularity is not a problem to my ears when these are coupled to a first-rate horn. No crossover is required, of course, but I feel better inserting a 10 or 20 ohm resistor in series with the unit, just in case it should short out, and I also feel I'm giving the amp a bit of protection since the piezo element appears to the amp as a small capacitor. The resistor has a negligible effect on output and may actually smooth the response a little. These are so incredibly inexpensive you can use multiple units in an array to give very broad dispersion in your room or venue and this is more important IMHO than ruler-flat response.

    • by hottyson

      on 8/25/2012

      Arrived broken

      Overall: 1 out of 5

      Shipped with no protection from other components. Just loose to tumble in the box during shipping. Ended up not using them since one was broken.

    Associated Products

    Image of 40mm Sound Absorption Pad

    LS00626 - 40mm Sound Absorption Pad

    Molded foam pads are ideal for sound dampening applications in small home studios, radio stations, home theaters and acoustic test facilities. Overall dimensions: 1000mm (39.37") x 500mm (19.69"), available in 40mm or 60mm thickness. Sold in pa...

    Limited Stock


    Buy Now

    Others Also Bought

    Image of Double Sided Foam Tape

    28-955 - Double Sided Foam Tape

    •Thousands of uses •Fasten accessories to car dash, etc. •3/4" x 61/2' roll

    In Stock


    Buy Now
    Image of 22

    22-24120 - 22" Black Tactical Weatherproof Equipment Case

    Durable equipment case provides maximum shock protection for contents making it useful for instruments, audio/video equipment, tactical gear, photographic equipment and test equipment. Pre-cut cubed foam insert (top layer only) is easily customizable to fit nearly...

    In Stock


    Buy Now
    Image of 10MM High Performance Earbud

    35-5170 - 10MM High Performance Earbud

    High Performance Earbud Lightweight, stylish, high performance earbuds give crystal clear sound as well as a comfortable fit. Ideal for use with CD, MP3, MP4 and any other small portable audio players.

    In Stock


    Buy Now