MCM Electronics

15'' Die Cast Professional Woofer - 500W RMSMCM Part #: 55-2983  |  MCM Audio Select Part #: 55-2983

15'' Die Cast Professional Woofer - 500W RMS 4.6 stars from 8 reviews.
Login to rate or review this product

15" Paper Cone Woofer
Low cost general replacement woofer is ideal in a two way cabinets or as a subwoofer. It is perfect for prosound applications and is ideal in ported or sealed enclosures.

Also available in 4Ohm Version

Product Description

    General Specifications:
    • Nominal Diameter: 15 inch
    • Rated Impedance: 8 ohms
    • Operating Bandwidth: 30Hz ~ 2.5KHz
    • Power Handling Capacity: 500W RMS
    • Sensitivity (1W/M): 98 dB
    • Voice Coil Diameter: 4 inch
    • Overall frame diameter: 15.27"


    Thiele-Small Parameters:
    • Resonance Frequency Fs: 43-57 Hz
    • DC Resistance Re: 6.5 ohm
    • Mechanical Q Factor Qms: 2.8939
    • Electrical Q Factor Qes: 0.554
    • Total Q Factor Qts: 0.4648
    • Equivalent Cas air load Vas: 127.52 liters
    • Efficiency Bandwidth Product EBP 93-73
    • Voice Coil Over Hang X-max 7 mm


    Physical Information:
    • Cutout: 14.17"
    • Mounting Depth: 6.73"
    • Basket: Cast Aluminium
    • Magnet Type: 100 OZ
    • Cone Material: Non-Pressed Paper
    • Surround: Cloth
    • Dust Cap: Paper
    • Damper: Cloth

Product Reviews

  • "big speaker, but not as strong as i would like it" by john123456 on 2/6/2014
    Overall: 3 out of 5
    Value:
    Quality:
    Top 25 Contributor

    for low cost replacement speaker it is ok, however, the surround material is a little week, some good points are noted, the magnet is heavy, the frame is heavy but the draw back for me is the cone, and the cone surround material... improvements can be if the cone is heavier, and the cone surround of good rubber would be a vast improvement...

  • "THE WOOFERS ARE INSANE" by EmersiveAV on 11/24/2013
    Overall: 5 out of 5
    Value:
    Quality:

    Your not going to find better woofers for the money any where else.

    Although I haven't installed these woofers in the current design I have planned for them yet I can tell you just from opening the box and checking them out they are no joke. They have a lot in common with a supposedly better more popular brand we all know in the pro audio world with the two letter initials.........Look at the frame and whats the company that used that frame for years? Yea you know the one.

    Im building two way trapezoid full range PA mains with these and I have no doubt that these are going to pound out more bass then I really need out of my top boxes :) Huge voice coil and through spider coil leads will ensure no wire slapping the cone or any potential damage at solder joints during operation. Ill be buying more ion the future!

  • "difficult to front load" by baconwash on 4/9/2013
    Overall: 5 out of 5
    Value:
    Quality:

    Speaker great. Shipping great. The only problem is the speaker is ment to be rear loaded. Difficult to front load.

  • "Superb!" by W11223 on 1/29/2013
    Overall: 5 out of 5
    Value:
    Quality:

    Bought 2 for use in Altec 816 style horn-loaded cabinets in a biamped setup. VERY impressive sound. A bit on the inefficient side (98dB sensitivity) due to the mass of the excellent quality but heavy cone, not a problem in a horn loaded cabinet with a good amplifier. I use a 300W/ch amplifier and it's unbelievable how much sound comes out of a pair of these. Made for MCM by a well known and reputable manufacturer whose branded product is identical, but MUCH more expensive. These are a GREAT deal!

  • "great value" by rick1575 on 9/11/2012
    Overall: 4.5 out of 5
    Value:
    Quality:

    These subwoofers packed some punch for the size. I was considering 18 inch subs, but for now the 15s worked great. We used them for live performance outdoors and drove them with 450 watts. Strong cast frame with easy connections. May add 2 more later for some extra punch.

  • "Sounds great" by Neil Trahan on 8/22/2012
    Overall: 4.5 out of 5
    Value:
    Quality:

    Speaker sounds great ,great price will purchase again

  • "In a PA subwoofer." by sdallman on 9/3/2011
    Overall: 4.5 out of 5
    Value:
    Quality:

    I bought this speaker to replace a blown Black Widow. I have an EVM15B in an identical, sealed cabinet. Compared to the EVM15B, the EV is more efficient, with more happening in the high mids and low trebles. But the MCM can handle more power, and has a thicker, smoother low end. It will work great as a sub, and I'll likely put one in the EVM cabinet.

  • "Die-Cast frame, Die hard performance!" by tmacpcandaudio on 7/1/2011
    Overall: 5 out of 5
    Value:
    Quality:
    Top 25 Contributor

    These woofers are truly epic! In a 4 cubic foot enclosure with a slot loaded port, this woofer produced levels of bass I hadn't thought possible from a single, 8 ohm driver. Fed with 400w of clean power and some bass test tracks, my entire garage was vibrating, my garage doors shaking, things falling from shelves, all from a single driver! Truly amazed by the performance from such an inexpensive driver! Would work great as a PA subwoofer, or as a bottom cabinet for bass guitar under a 4x10 or some other midrange cab. This woofer does not produce midrange, though. Probably insufficient for 2-way use in a PA, and definitely insufficient on its own for a bass cab if you play any funk. That said, this speaker does one job, produces bass, and it does it well.

  • Rate It!

    Login Here to rate and review this product.

Associated Products

Image of Gold Plated Speaker Terminals - Square

50-1275 - Gold Plated Speaker Terminals - Square

High powered speaker terminals for use with heavy—duty speaker wire Made of high—quality plastic construction Gold plated binding post Available in round, square and rectangular bi—wire with bridge

In Stock

$2.39

Buy Now
Image of Acoustic Dampening Pad

LS00916 - Acoustic Dampening Pad

Perfect for internal speaker enclosure dampening, this wadding provides the perfect solution to eliminating problematic low frequency internal resonance. Made from 2/3 sheeps wool and 1/3 polyester fiber, this material is a must for any speaker building or...

In Stock

$6.39

Buy Now

Others Also Bought

Image of Universal Television Stand, For Televisions 32

50-14795 - Universal Television Stand, For Televisions 32" ~ 60"

Universal Television Stand Perfect for flat panel televisions that were mounted to the wall, but are to be moved to tabletop use. Universal mounting plate attaches to all VESA standard sets from 200x200 through 600x400, and provides a secure and attractive mount...

In Stock

$59.99

Buy Now
Image of Bracket Pole Mount VESA75/100

50-14534 - Bracket Pole Mount VESA75/100

Pole Mount Bracket for LCD Monitors Rugged bracket fits any 30mm ~ 60mm diameter pole, whether positioned horizontally or vertically. Great for use with PA speaker and light stands, lighting and stage trusses, and support masts. Pivoting mechanism allows monito...

In Stock

$20.39

Buy Now
Image of Equipment Wall Bracket - Adjustable Length

50-14780 - Equipment Wall Bracket - Adjustable Length

White Equipment Wall Bracket Designed for supporting microwave ovens from the wall, this bracket is ideal for any type of equipment.

In Stock

$13.29

Buy Now
Package Specifications & Dimensions
Weight:25.5 lbs.
Hazardous:Yes
RoHS Comp:Yes
Warranty:365 days
Need to Return?
Length:16.5 in.
Width:15.75 in.
Height:8 in.
Shipping Information
Extra Shipping Charge:No
Drop Ship:No
Catalog Pages
Catalog/Page:

MCM Cat 57, Page 154

MCM Cat 56, Page 278

PDF Reference
Datasheet

Requires Adobe Acrobat Reader.

Mfr. Info

MCM Audio Select Logo
Mfr. Name:MCM Audio Select
Mfr. Part Number:55-2983