MCM Electronics

Heavy Duty Die Cast 15'' Woofer - 400W RMSMCM Part #: 55-2993  |  MCM Audio Select Part #: 55-2993

Heavy Duty Die Cast 15'' Woofer - 400W RMS 4.5 stars from 2 reviews.
Login to rate or review this product

15" Die Cast Professional Woofer
Full range speaker is perfect as a replacement or upgrade for any pro sound cabinet. Ideal in musical instrument cabinets, as part of a two-way system or alone as a subwoofer. Massive die cast assembly and 4" voice coil ensure rugged reliability in most live sound environments.

Product Description

    Features:
  • Suitable for sealed or vented enclosures
  • Rigid die-cast aluminum frame
  • Treated paper cone
  • Treated cloth accordion surround
  • 4.0" high temperature voice coil
  • 100oz. magnet
    Specifications:
  • Sensitivity: 98dB (W/M)
  • Impedance: 8ohm
  • Re: 6.6ohm
  • Le: 1.93mH
  • Frequency response: 40Hz ~ 1.5KHz
  • Fs: 44.0Hz
  • Qts: 0.53
  • Qes: 0.63
  • Qms: 3.5
  • Vas: 123.2 liters
  • Xmax: 6.5mm
  • Overall frame diameter: 15.27"
  • Required cutout: 14.00"
  • Mounting depth: 5.91"

Product Reviews

  • "vary impressive woofer" by john123456 on 11/9/2013
    Overall: 4.5 out of 5
    Value:
    Quality:
    Top 25 Contributor

    if you want something loud and clear.... look no further, this massive 15 inch heavy duty woofer puts out the power, keep in mind that the rms, it is good to have a strong powerful amplifier that can push these big boys... good strong woofer cone, heavy die cast frame, and massive 100 oz magnet... this woofer can be used as a single sub, or build a speaker with proper crossovers.... this is a heavy speaker, reinforce your sub box, or speaker cabinet to hold these in....

  • "Professional Builder/Soundman/ Musician" by DennisMenace on 6/18/2013
    Overall: 4.5 out of 5
    Value:
    Quality:

    I removed the blown JBL lo-freq. woofer commercially used in mostly all lower priced units they build. Mine are the JBL TR225. They only rate these at 200 Watt which is not advisable to be used as a Main Speaker. The speaker looks like a 2-way double 15" system, but has a passive 3-way x-over @ 750 hz. They are disposable stamped frame speakers costing near $200.00 each to replace and just not worth it. I replaced them with the MCM Select 55-2993 and I didn`t have to change anything but nurse the original screws into position(easy remedy is to use a chainsaw file to file the inside of each hole on this massive die-cast a mere .05") ..but I didn`t and still fit. I then compared them to my other identical set and cranked up the "Grand Funk Live Album"...Now that my friends is a sure way to tell if subsonic freqs` are going to reach your ear..Wewww what a difference! I may not even use Subwoofers now in smaller Clubs, and I will use the #55-2963 soon to replace the mid-range 15' woofers. Paying for the name JBL days are over! The 4"voice coil and 20+ lb. speaker have real paper like vintage equipment, and good equipment should have for professional sound.

  • Rate It!

    Login Here to rate and review this product.

Associated Products

Image of 3M™ Black Strip-Caulk - Box of 60 - 1' Lengths

108-3190 - 3M™ Black Strip-Caulk - Box of 60 - 1' Lengths

Soft, non-hardening caulking material for use in all types of seams, joints and openings. This caulk can easily be thumbed into place and smoothed with finger. Non-sag consistency makes it ideal for vertical and overhead applications.

On Backorder(Expected in 7 days)

$15.99

Buy Now
Image of Heavy Duty Speaker Binding Post Set

50-4475 - Heavy Duty Speaker Binding Post Set

Gold plated binding posts are ideal for demanding speaker enclosure applications where thick walls prohibit the use of conventional cup terminals. Extended thread length is perfect for enclosures of up to 1" thick. To install, simply drill a 1/4" hole&...

In Stock

$7.99

Buy Now
Image of Black Connector Dish for Two EP or NL4MPR / NL8MPR Jacks - 5'' x 7''

555-13332 - Black Connector Dish for Two EP or NL4MPR / NL8MPR Jacks - 5'' x 7''

Connector Dish for Two EP or Speakon Connectors This dish provides professional looks and quality to any project. Material: 1.2mm steel Color: Black powder coat Connector cutouts: Two EP or NL4MPR/NL8MPR Overall dimensions: 5" x 7" Required cutout: 3 5/8...

In Stock

$7.79

Buy Now

Others Also Bought

Image of Heavy Duty Die Cast 12'' Woofer - 350W RMS

55-2992 - Heavy Duty Die Cast 12'' Woofer - 350W RMS

12" Die Cast Professional Woofer Full range speaker is perfect as a replacement or upgrade for any pro sound cabinet. Ideal in musical instrument cabinets, as part of a two-way system or alone in a compact subwoofer. Massive die cast assembly and 4" voice coil ...

In Stock

$73.49

Buy Now
Image of Rubber Foot with Metal Washer - 1 1/2'' Diameter x 5/8'' Thickness

555-13374 - Rubber Foot with Metal Washer - 1 1/2'' Diameter x 5/8'' Thickness

Rubber Foot with Metal Washer Provide traction and stability to your equipment, as well as protect the surface the equipment is sitting on with these rubber feet. Includes metal washer Dimensions: 1 1/2" (Diameter) x 5/8" (Thickness) Sold individually

In Stock

$0.49

Buy Now
Package Specifications & Dimensions
Weight:22 lbs.
Hazardous:Yes
RoHS Comp:Yes
Warranty:365 days
Need to Return?
Length:16.25 in.
Width:16.25 in.
Height:7 in.
Shipping Information
Extra Shipping Charge:No
Drop Ship:No
Catalog Pages
Catalog/Page:

MCM Cat 57, Page 154

PDF Reference
Datasheet

Requires Adobe Acrobat Reader.

Mfr. Info

MCM Audio Select Logo
Mfr. Name:MCM Audio Select
Mfr. Part Number:55-2993