MCM Electronics

Osepp IR Proximity SensorMCM Part #: 83-15275  |  Osepp Part #: PROX-01

No reviews yet!
Login to rate or review this product

The OSEPP IR Proximity Sensor Module measures distances. It utilizes the Sharp GP2Y0D805Z0F measuring sensor unit which is composed of an integrated combination of photo diode, infrared emitting diode and a signal processor. The digital value from the proximity sensor is read out on the I²C bus. The module uses the I²C interface for data communication. The I²C lines are packaged with the power and ground lines into a modular connector, which allows easy plug and play operation. There are two connectors on the module to enable daisy chaining of multiple I²C device ...(read more below)

Product Description

The OSEPP IR Proximity Sensor Module measures distances. It utilizes the Sharp GP2Y0D805Z0F measuring sensor unit which is composed of an integrated combination of photo diode, infrared emitting diode and a signal processor. The digital value from the proximity sensor is read out on the I²C bus.

The module uses the I²C interface for data communication. The I²C lines are packaged with the power and ground lines into a modular connector, which allows easy plug and play operation. There are two connectors on the module to enable daisy chaining of multiple I²C devices together.

This sensor module is ideal for designs that need to detect objects within a certain range or designs that need to avoid obstacles. It can also be used as a touchless switch.

  • Plug and play with OSEPP I²C Expansion Shield
  • Plug and play with OSEPP I²C Expansion Shield
  • Detection range of 0.5 – 5.0 cm
  • Supports I²C interfacing with 4 programmable 7-bit address (0×20, 0×22, 0×24, 0×26) to allow up to 4 OSEPP IR Proximity Sensor module to exist on the same I²C bus
  • Provides pass-through connector to support daisy chaining of multiple sensors from the OSEPP Sensor Module family
  • Provides 0.1” breakout points for power and I²C interface pins access
I²C Addresses (7-bit) 0×20, 0×22, 0×24, 0×26
Form Factor 23 mm x 36 mm
Power Consumption 475 mW
Connector Pin Definition Pin 1: Power
Pin 2: I²C Data
Pin 3: Ground
Pin 4: I²C Clock

Product Reviews

  • Rate It!
    Be the first to rate this product!

    Login Here to rate and review this product.

Others Also Bought

Image of Raspberry Pi Interface Board

28-17734 - Raspberry Pi Interface Board

The Quick2Wire Interface Board gives you easy access to all the features on your Raspberry Pi’s expansion header with added protection of not creating a dead Pi

In Stock

$16.99

Buy Now
Image of Arduino Proto Shield Kit

83-15139 - Arduino Proto Shield Kit

Build your own Arduino shield using the compact and flexible Proto Shield kit. Solder together a limitless range of circuits and reuse it in all your Arduino projects. A standard 0.1" prototyping grid accepts commonly used through-hole parts and chips. You could...

In Stock

$9.96

Buy Now
Image of 8Gb Raspberry Pi Operating System

83-16323 - 8Gb Raspberry Pi Operating System

This 8GB Micro SDHC card comes pre-installed with NOOBS Operating System, a system image with 6 different Linux based operating systems optimized to run on the Raspberry Pi.

In Stock

$12.71

Buy Now
Package Specifications & Dimensions
Weight:0.1 lbs.
Hazardous:No
RoHS Comp:Yes
Warranty:365 days
Need to Return?
Length:5 in.
Width:8 in.
Height:5 in.
Shipping Information
Extra Shipping Charge:No
Drop Ship:No
Catalog Pages
Catalog/Page:

MCM Cat 57, Page 707

PDF Reference
Datasheet

Requires Adobe Acrobat Reader.

Mfr. Info

Osepp Logo
Mfr. Name:Osepp
Mfr. Part Number:PROX-01