This connector is a double-row, 6-pin (2x3), straight female header strip designed to match 0.1" male headers.
These 0.1" female header strips are commonly used as low-cost connectors for custom-made cables or perforated prototyping PCBs. The standard spacing is the same as on most solderless breadboards and matches 0.1" male header strips. Female headers cannot be broken into smaller strips, but they come in a variety of commonly used pin counts. Most of the Orangutan robot controllers use these female headers as connectors.
Login Here to rate and review this product.
83-14588 - Blue & White 16x2 LCD + Keypad Kit for Raspberry Pi
This new Adafruit Pi Plate makes it easy to use a 16x2 Character LCD. 16x2 Character LCDs typically require quite a few digital pins, 6 to control the LCD and then another 1 to control the backlight for a total of 7 pins. That's nearly all the GPIO available on a ...
21-675 - Clip On Heat Sink Kit 5 PER Kit
Five spring loaded aluninum heat sinks Just clip onto lead of heat sensitive compinent to solder Dissipates heat safely without damaging component Five per set
22-3790 - Six Piece Soldering Aid Kit
Specialized tools for soldering Includes brush/scraper, brush/reamer, fork/reamer, hook/remover, hook/lifter, scraper/curved point