MCM Electronics

100:1 Micro Metl Motor EX Shft Stall Torque @ 6V 12 Oz-inMCM Part #: 28-17691  |  Pololu Robotics & Electronics Part #: 2204

No reviews yet!
Login to rate or review this product

This gearmotor is a miniature (0.94" x 0.39" x 0.47"), low-current brushed DC motor with 100:1 metal gearbox, similar to Sanyo's popular 12 mm gearmotors. These units have a 0.365"-long, 3 mm-diameter D-shaped output shaft. This version also has a 4.5 x 1 mm extended motor shaft.

Key specs at 6 V: 120 RPM and 40 mA free-run, 12 oz-in (0.9 kg-cm) and 0.36 A stall.

Product Description

These tiny brushed DC gearmotors are intended for use at 6 V, though in general, these kinds of motors can run at voltages above and below this nominal voltage, so they should comfortably operate in the 3 - 9 V range (rotation can start at voltages as low as 0.5 V). Lower voltages might not be practical, and higher voltages could start negatively affecting the life of the motor. The micro metal gearmotors are available in a wide range of gear ratios-from 5:1 up to 1000:1-and offer a choice between three different motors: high-power (HP), medium-power (MP), and standard. With the exception of the 1000:1 gear ratio versions, all of the micro metal gearmotors have the same physical dimensions, so one version can be easily swapped for another if your design requirements change.

Some versions of the gearmotors are sold with an additional 1mm-diameter output shaft that protrudes from the rear of the motor. This 4.5mm-long rear shaft rotates at the same speed as the input to the gearbox and offers a way to add a custom-built encoder to provide motor speed or position feedback.

Full range of motors available

Motor TypeStall Current @ 6V Speed @ 6V Stall Torque @ 6VGearbox Shaft OnlyGearbox & Motor Shafts
high-power
(HP)
1600 mA 6000 RPM 2 oz-in 5:1 micro HP 
3000 RPM 4 oz-in 10:1 micro HP10:1 micro HP
1000 RPM 9 oz-in 30:1 micro HP30:1 micro HP
625 RPM 15 oz-in 50:1 micro HP50:1 micro HP
400 RPM 22 oz-in 75:1 micro HP 
320 RPM 30 oz-in 100:1 micro HP100:1 micro HP
200 RPM 40 oz-in 150:1 micro HP 
140 RPM 50 oz-in 210:1 micro HP 
120 RPM 60 oz-in 250:1 micro HP 
100 RPM 70 oz-in 298:1 micro HP298:1 micro HP
32 RPM 125 oz-in 1000:1 micro HP 
medium-power
(MP)
700 mA 2200 RPM 3 oz-in 10:1 micro MP 
730 RPM 8 oz-in 30:1 micro MP 
420 RPM 13 oz-in 50:1 micro MP 
290 RPM 17 oz-in 75:1 micro MP 
220 RPM 19 oz-in 100:1 micro MP 
150 RPM 24 oz-in 150:1 micro MP 
75 RPM 46 oz-in 298:1 micro MP 
low-power360 mA 2500 RPM 1 oz-in 5:1 micro 
1300 RPM 2 oz-in 10:1 micro 
440 RPM 4 oz-in 30:1 micro30:1 micro
250 RPM 7 oz-in 50:1 micro50:1 micro
170 RPM 9 oz-in 75:1 micro 
120 RPM 12 oz-in 100:1 micro100:1 micro
85 RPM 17 oz-in 150:1 micro 
60 RPM 27 oz-in 210:1 micro 
50 RPM 32 oz-in 250:1 micro 
45 RPM 40 oz-in 298:1 micro298:1 micro
14 RPM 70 oz-in 1000:1 micro 
Note: The 1000:1 gearmotors can generate enough torque to damage themselves. The stall torque values given for those two motors are theoretical, and we strongly recommend you avoid stalling them.

Product Reviews

  • Rate It!
    Be the first to rate this product!

    Login Here to rate and review this product.

Others Also Bought

Image of TB3000 Self-mating Hook and Loop Fasteners - White

108-4504 - TB3000 Self-mating Hook and Loop Fasteners - White

3M™ hook and loop fasteners are designed to improve appearance, function and productivity of traditional fasteners. This thin back to back fastener can wrap around and attach to itself making it Ideal for cabling, binding of different materials, bundling an...

Limited Stock

$9.89

Buy Now
Image of TB3526N/TB3572N High Performance Hook and Loop Fasteners - Black

108-4510 - TB3526N/TB3572N High Performance Hook and Loop Fasteners - Black

3M™ hook and loop fasteners are designed to improve appearance, function and productivity of traditional fasteners. This high performance rubber-based adhesive bonds to metal and plastics, including polypropylene, polyethylene and other low surface energy p...

In Stock

$19.89

Buy Now
Package Specifications & Dimensions
Weight:0.03 lbs.
Hazardous:No
RoHS Comp:Yes
Warranty:365 days
Need to Return?
Length:3 in.
Width:2 in.
Height:0.75 in.
Shipping Information
Extra Shipping Charge:No
Drop Ship:No
Catalog Pages
Catalog/Page:

Mfr. Info

Pololu Robotics & Electronics Logo
Mfr. Name:Pololu Robotics & Electronics
Mfr. Part Number:2204