RG58U TNC Male Clamp Type
27-5530 - Crimp Type Male BNC Connector
Carry one connector for six different cables. Patent pending captive-pin BNC male crimp connector will handle center conductor wire size of 18~26AWG. Comes with three crimp ferrules to fit the following cables: mini-coax, West Penn 825, RG-58, RG-59, RG-59 plenum...
27-5660 - F-Type Coupler F-81 1GHz w/o Washer/Nut
Commercial grade F-type jack-to-jack coupler is ideal for coaxial RF distribution networks used in voice, data and telephone applications.
27-5825 - RidgeLock Weatherproof "F" Connector
This is our ‘Universal’ fit RIDGELOC 360. Like all previous models it’s textured sleeve cylinder and the end bell capture rings prevent backing up regardless of where the end bell is located on the sleeve after compression. The coax is POSITIVELY captured by the e...
27-5845 - Snap-N-Seal "F" Type connector for RG6 Cable
The Ultimate™ Snap-n- seal® connector is designed to reduce assembly time and simplify installation. With its user-friendly, pre-positioned plastic sleeve and true 360º compression, this connector makes terminating coax drop cables fast and accurate.
33-3085 - F Driver
The "F" driver is a multi-purpose tool designed for most television RF cable applications. This tool is indispensable for DSS/DBS, CATV and MATV installers. The "F" driver incorporates two tools into one. The socket end helps get the connector into...
21-4590 - Small PC Prototype Board
This prototype board features 25 rows of connections. The center two rows are one connection the length of the board. The outside 2 holes are common connection on both sides of the board and all rows. Each row also features 2 separate holes, 3 separate holes with ...
22-1735 - Multi Angle Vise
Versatile tool is invaluable on any technician's or hobbyist's bench. Padded jaw opens 2" and swivels a full 360¡. In addition the entire head assembly can be pivoted 90¡ allowing an infinite range of clamping positions. Padded table clamp attaches to surfaces up ...
I have been dealing with MCM for over 30 years now. If I didn't like the service I'd would have found a different supplier 30 years ago. For most of my needs they are the 1st stop on my shopping list.