MCM Electronics

Rackmount Outlet Strip with LED dB MeterMCM Part #: 555-12730  |  Pyle Part #: PDBC60

Rackmount Outlet Strip with LED dB Meter 2.8 stars from 2 reviews.
Login to rate or review this product

Rackmount Outlet Strip with LED dB Meter

A Pyle Power Management System is an easy way to keep equipment power cables neat and organized. Less clutter means cooler operating temperatures, which in turn means better performance out of your equipment. The PDBC60 features a LED level monitoring display with selectible Bar and Dot display settings.

Product Description

  • Dual L.E.D Signal Level Meter
  • Level Input Signal Control
  • 2 RCA Input Plug
  • 2 RCA Output Plug
  • Two Kinds Of Signal Input Volume Display
  • L.E.D. Mode Selector
  • Styles: Bar And Dot
  • Eight grounded outlets
  • Rack Mount Brackets
  • Dimensions: 19"W X 5.6"H X 1.7"D

Product Reviews

  • "Seems to function just fine with an annoying "feature"" by glenspot on 12/17/2013
    Overall: 3 out of 5

    This unit seems to function just fine. I have purchased other products from Pyle over the years, and this one is comparable. It is made of lower quality light-weight materials, however functions as promised.

    The db display seems slightly delayed and generally inaccurate. It is not designed to be used as an accurate level meter, but more as a decoration.

    The meter also has what I consider to be an annoying "default" state. When the unit is not receiving audio, the meters cycle through various patters. This "default" state begins within a second or two of audio being removed, so there is very little ZERO time on the meter. Also, what the unit considers to be a lack of audio is not ACTUALLY a lack of audio. The unit remains in this "sleep mode" even with white noise at -20dB being fed into it. (it began showing audio levels at -19dB.

  • "Outlet Strip Fails Rack Mount" by imagemcm on 7/9/2012
    Overall: 2.5 out of 5

    This item is a nice outlet strip but be advised that its rack mount brackets are not the right size. When installed the rack mounting brackets are about 1/8" to short to mate with the rack screw holes. I tried to install spacers under the brackets and this did bring them out to the right size. But then the unit tipped down in the back because the brackets can't be tightened with spacers under them. About the only other methods to make this work are 1) put it on a rack shelf (the method I ended up with) or 2) reaming out the holes in one of the mounting brackets until it is the right distance. I haven't got the audio connected yet but the LED's do run a back and forth patteren in case you are not using the audio feature.

  • Rate It!

    Login Here to rate and review this product.

Associated Products

Image of 12

28-11105 - 12" Extension Cord with Flat Rotating Plug

Make your installation as clean and professional as possible with these extension cords featuring a flat 360° rotating plug. Click here for the complete list of Stellar Labs Power Products

In Stock


Buy Now

Others Also Bought

Image of Large PAN Head Rack Screws     With Washer 100 Pack

555-20850 - Large PAN Head Rack Screws With Washer 100 Pack

100 Pack of Pan Head Rack Screws #10-32 x 0.625" screws are designed for mounting equipment in standard 19" racks. Large head and integral nylon washer protects equipment faceplate. Sold in packages of 100.

In Stock


Buy Now
Image of EZ RJ-45 CAT5e Connectors - 50 pk

36-1640 - EZ RJ-45 CAT5e Connectors - 50 pk

Feed Through RJ45 Connectors (50pk)The patented connector simplifies Category 5 termination by allowing wire to be inserted through the connector and out the front, allowing easily verification of proper wiring order. Seating the cable jacket tightly in the rear o...

In Stock


Buy Now
Image of 3RU Rackmount Fan with Temperature Display - Four 90mm Fans

555-12755 - 3RU Rackmount Fan with Temperature Display - Four 90mm Fans

Rack Mount Fan with Temperature Display Efficient 3U fan panel contains four 90mm fans and provides outstanding air movement, great for cooling all types of 19" rack systems. It is perfect for computer servers, amplifier racks or any type of equipment that is sus...

In Stock


Buy Now
Package Specifications & Dimensions
Weight:4.39 lbs.
RoHS Comp:Yes
Warranty:90 days
Need to Return?
Length:20 in.
Width:10 in.
Height:3.25 in.
Shipping Information
Extra Shipping Charge:No
Drop Ship:No
Catalog Pages

MCM Cat 57, Page 128

MCM Cat 56, Page 272

PDF Reference

Requires Adobe Acrobat Reader.

Mfr. Info

Pyle Logo
Mfr. Name:Pyle
Mfr. Part Number:PDBC60
Intorducing the new Raspberry Pi 2 - Now 6x faster
Same low price and size. More memory faster quad core procesor