MCM Electronics

1'' Titanium Bullet TweeterMCM Part #: 53-710  |  Pyle Part #: PDBT28

1'' Titanium Bullet Tweeter 4.5 stars from 6 reviews.
Login to rate or review this product

Titanium Bullet Tweeter

Heavy duty titanium tweeter features a die cast aluminum frame, 1" high temperature Kapton voice coil with ferrofluid cooling, and a 30 oz. magnet structure. It is suitable for professional sound reinforcement applications and instrument amplifier cabinets. Machined front mounting flange enables clean simplified mounting from the front of the baffle, providing professional appearance.

Product Description

  • Die-Cast Aluminum Frame
  • 1'' High temperature Kapton voice Coil
  • 30 oz magnet structure
  • Ferrofluid cooled voice coil
  • Supplied with Mylar high pass capacitor
  • 150 Watts RMS/300 Watts Peak
  • Nominal impedance: 8ohm
  • Sensitivity: 104dB
  • Frequency Response: 2KHz ~ 20KHz
  • Overall frame dimensions: 3.25" x 3.25"
  • Required cutout: 3.125'' diameter
  • Mounting depth: 2''

Product Reviews

  • "good looking" by xylazine10 on 2/19/2015
    Overall: 2 out of 5

    Good looking speakers but one is bearly audible, the don't test them before shipping. Will update my review if mcm will honor the guarantee.

  • "Super Bright Driver" by rinzel on 3/22/2014
    Overall: 5 out of 5

    I bought these to replace piezo horns in 3-way sealed cabinets. They sounded amazing and have a frequency response high enough to push the hearing envelope of a dog, so expect to pad these to normalize the response to the other driver(s) you are using. Unfortunately, the flat-to-flat dimension of these is 3.125", not 3.25" as is suggested on the product webpage (Pyle's wepgae is accurate). I had to exchange them for MCM p/n 53-1070.

  • "TWEETER" by geostorm on 1/27/2014
    Overall: 5 out of 5

    This tweeter is powerful, a bit much for the three way enclosure I built but am using an equilizer and tuned this thing down abit. Sound is crisp and perfectly clear. Am using outside under a Gazebo, so in a ten by twelve foot area and just sounds incredible. Would recommend for really a bigger area unless you can de-tune abit in a smaller area, non the less awesome speaker!!!!

  • "Excellent sound and definition." by Bradon on 8/5/2013
    Overall: 5 out of 5

    I used one of these in a center channel with a 11uf poly capacitor and a 100 watt 8ohm L-pad for adjustment.I am very pleased with the results and the definition of the voices in the videos and TV.....The template in the package for the mounting hole is NOT for this speaker it will fall through the oversized hole if you use it ,carefull.

  • "Nice!!!!" by bwfi4ni on 8/4/2012
    Overall: 5 out of 5

    Bought 2 of these for cabinets i built, and they sound great!!! Had to actually adjust the high end as they are definatly strong. Very clear sound, and very happy!!!

  • "Great Addition to my 3 way system" by sthome25 on 5/16/2011
    Overall: 5 out of 5

    I added these tweeters to a 15" woofer and 5" Mid. The clairity is awesome. They are MUCH heavier than i thought they would be but it was not an issue. Two big thumbs up!

  • Rate It!

    Login Here to rate and review this product.

Associated Products

Image of 25 ft 18 Gauge Banana Speaker Cable

24-2610 - 25 ft 18 Gauge Banana Speaker Cable

Speaker cable for use when connecting home theater equipment with banana type connectors for speaker terminals. 18AWG with gold plated banana connectors. Sold one cable per package.

In Stock


Buy Now
Image of Heavy Duty Speaker Binding Post Set

50-4475 - Heavy Duty Speaker Binding Post Set

Gold plated binding posts are ideal for demanding speaker enclosure applications where thick walls prohibit the use of conventional cup terminals. Extended thread length is perfect for enclosures of up to 1" thick. To install, simply drill a 1/4" hole&...

In Stock


Buy Now

Others Also Bought

Image of Stackable Microphone Stand - Black

35-4085 - Stackable Microphone Stand - Black

Stackable Microphone Stand Perfect for any stage or studio environment, this mic stand includes a unique die cast base that allows up to six units to be stacked together. It is ideal in environments where storage space is limited and convenient access is import...

In Stock


Buy Now
Package Specifications & Dimensions
Weight:1.75 lbs.
Warranty:365 days
Need to Return?
Length:5 in.
Width:5 in.
Height:3.05 in.
Shipping Information
Extra Shipping Charge:No
Drop Ship:No
Catalog Pages

MCM Cat 57, Page 179

MCM Cat 56, Page 306

PDF Reference

Requires Adobe Acrobat Reader.

Mfr. Info

Pyle Logo
Mfr. Name:Pyle
Mfr. Part Number:PDBT28
Save at least 15% on all Tenma Test Equipment through Sunday. Use promo code EMC396.
Save at least 15% on all Tenma Test Equipment through Sunday. Use promo code EMC396.