MCM Electronics

EZ Series Microphone Preamp with Compressor Single InputMCM Part #: 555-0672  |  Radio Design Labs Part #: EZ-MPA1

No reviews yet!
Login to rate or review this product

EZ series microphone preamplifiers feature front-panel volume controls and audio level metering. A front-panel switch engages an audio compressor to control overloads and clipping during high level audio bursts or peaks from the microphone. Dynamic or condenser microphones are both supported with rear-panel switchable phantom voltage. They are ideal to add microphone inputs to mixers and amplifiers with line inputs.

Product Description

  • RCA or 3.5mm output
  • LED VU metering facilitates easy level adjustment
  • Single input


Specifications:
  • Frequency response: 80 Hz to 40 kHz (±1 dB, mic input, -6 dB at 20 Hz with integral high-pass filter)
  • Compression: 20 dB range, switch-selectable
  • Requires 24VDC, 100mA (AC adapter included)
  • Dimensions: 5.75” (W) x 3” (D)
  • 1/3 rack width

Product Reviews

  • Rate It!
    Be the first to rate this product!

    Login Here to rate and review this product.

Others Also Bought

Image of Bolt On Compression 250W RMS Tweeter Horn Driver

53-900 - Bolt On Compression 250W RMS Tweeter Horn Driver

Compression Midrange / High Frequency Driver This efficient midrange driver is compatible with horns that utilize two and four bolt mounting patterns with M6 threaded holes.

In Stock

$16.99

Buy Now
Image of 1.35'' Threaded Titanium Compression Tweeter Driver - 100W RMS

53-1210 - 1.35'' Threaded Titanium Compression Tweeter Driver - 100W RMS

This low cost compression driver is perfect for most two way applications. Perfect for use with a wide variety of horn lens styles 15oz. magnet 100W/200w RMS/Peak power capacity Titanium dome 1.35" voice coil 15oz. magnet Sensitivity: 100dB (W/M) Imped...

In Stock

$9.99

Buy Now
Image of Temflex 1700 Vinyl Electrical Tape

108-145 - Temflex 1700 Vinyl Electrical Tape

•PVC insulating electricians tape •7 mil x 3/4" •60' roll •UL listed, CSA certified for 176°F

In Stock

$1.49

Buy Now
Package Specifications & Dimensions
Weight:0.96 lbs.
Hazardous:No
RoHS Comp:Yes
Warranty:365 days
Need to Return?
Length:10.5 in.
Width:7.25 in.
Height:2.5 in.
Shipping Information
Extra Shipping Charge:No
Drop Ship:No
Catalog Pages
Catalog/Page:

MCM Cat 57, Page 146

MCM Cat 56, Page 161

PDF Reference
Datasheet

Requires Adobe Acrobat Reader.

Mfr. Info

Radio Design Labs Logo
Mfr. Name:Radio Design Labs
Mfr. Part Number:EZ-MPA1