MCM Electronics

RDL Audio Controlled RelayMCM Part #: 555-ST-ACR2  |  Radio Design Labs Part #: ST-ACR2

No reviews yet!
Login to rate or review this product

Audio Controlled Relay

The ST-ACR2 is an Audio Controlled Relay in the STICK-ON® series. These products are designed for quick, convenient installation, and reliable operation in a variety of control applications. The ST-ACR2 is designed to switch on line level sources.Two multiturn trimmers are provided. The SENS potentiometer adjusts the audio input sensitivity. A threshold LED facilitates accurate adjustment.

Product Description

The module can be set to trigger on signals between -30 dBu and 0 dBu. The DELAY control sets the time required for the relay to release when the audio drops below the threshold.The delay adjustment range for the ST-ACR2 is from 5 seconds to 50 seconds.

    Features
  • Switching Controlled by Audio Signal
  • Sensing of Line-Level Signal
  • Silence Sensing
  • DPDT Switching Contacts
  • Open-Collector SLAVE Output

Specifications
Input Connections: May be connected balanced or unbalanced
Control Output: Open-collector @ 25 mA suitable to drive indicators or slave LCR relay
Indicators: Audio threshold LED (for setting sensitivity)
Retrigger Delay: 250 ms
Contacts: Double-pole-double-throw
Max. Switching Power: 60 W, 125 VA
Max. Switching Voltage: 220 VDC, 250 VAC
Max. Switching Current: 2 A
Activation Response Time: 25 ms
Input Sensitivity: -30 dBu to 0 dBu (adjustable)
Relay Release Delay: 5 sec. to 50 sec. nominal (adjustable)
Ambient Operating Environment: 0° C to 55° C
Power Requirement GROUND-REFERENCED, 24 VDC @ 50 mA*
* Assumes 20 mA max load at SLAVE output
Dimensions: Height: 0.7" (1.7 cm), Width: 3" (7.6 cm), Depth: 1.6" (3.9 cm)
Package Dimensions: 2" x 2" x 4"
Shipping Weight: 0.2 lbs.


Product Reviews

  • Rate It!
    Be the first to rate this product!

    Login Here to rate and review this product.

Associated Products

Image of RDL Power Supply - 500mA

555-PS-24A - RDL Power Supply - 500mA

Designed specifically for use with all RDL modules. All models are single ended, 24VDC output. Output current: 500mA

In Stock

$22.99

Buy Now
Image of RDL Power Supply - 1A

555-PS-24K - RDL Power Supply - 1A

Designed specifically for use with all RDL modules. All models are single ended, 24VDC output. Output current: 1A

In Stock

$28.99

Buy Now

Others Also Bought

Image of Multi Outlet Gaming Extension Cord

28-11071 - Multi Outlet Gaming Extension Cord

Designed for kiosks, slot machines and arcade games Plugs into any 120V feed and provides 3 x NEMA 5-15R outlets as well as a monitor receptacle Constructed of 18ga SVT cable Allows connection of internal devices as well as extra outlets for maintenance Per...

In Stock

$9.49

Buy Now
Image of Stainless Steel VGA/HDMI/Composite Video/L/R Audio/3.5mm Wall Plate

50-10157 - Stainless Steel VGA/HDMI/Composite Video/L/R Audio/3.5mm Wall Plate

VGA + HDMI + Composite Video + L/R Audio + 3.5mm Stainless Steel Wall Plate Single gang stainless cover plate features an HD15 connector, HDMI connector, composite video RCA connection, L/R audio RCA connections, and stereo 3.5mm audio connector, suitable for any...

In Stock

$24.49

Buy Now
Image of Stereo Line Level Amplifier Adjustable 0 ~ 15dB Gain

50-14820 - Stereo Line Level Amplifier Adjustable 0 ~ 15dB Gain

Stereo Line-Level Boost Amplifier Based on the LM-833N op-amp circuit, these amplifiers provide up to 15dB of exceptionally quiet gain. Intended for line-level correction, whether you are dealing with a long wire-run, or just have a piece of equipment with a low...

In Stock

$34.99

Buy Now
Package Specifications & Dimensions
Weight:0.23 lbs.
Hazardous:No
Warranty:1095 days
Need to Return?
Length:4.25 in.
Width:2.25 in.
Height:2 in.
Shipping Information
Extra Shipping Charge:No
Drop Ship:No
Catalog Pages
Catalog/Page:

MCM Cat 57, Page 149

MCM Cat 56, Page 164

PDF Reference
Datasheet

Requires Adobe Acrobat Reader.

Mfr. Info

Radio Design Labs Logo
Mfr. Name:Radio Design Labs
Mfr. Part Number:ST-ACR2