MCM Electronics

RDL Microphone Preamplifier By Radio Design Labs (STM-2)

0 stars No reviews yet
$137.99 

Microphone Preamplifier

The STM-2 is a low-noise microphone preamp designed for use in commercial sound, broadcast, and recording. The STM-2 is very flexible, with gain adjustment from 35 to 65 dB, two balanced or unbalanced outputs, and available phantom supply input. Its ultra-low distortion and low-noise performance make it the best choice, even when larger preamps could be used.

Specifications Top

The STM-2 supply input is single ended and operates from 24 VDC. Operation from 12 VDC is possible with a 6 dB reduction in headroom. Each output drives high or low impedance loads.

    Features
  • Low-Noise Mic Preamp
  • Adjustable Output Level
  • High or Low Impedance Mic Inputs
  • Mic Input to 2 Line Outputs
  • Two Balanced or Unbalanced Outputs
  • Phantom Capability
  • RF-Filtered Inputs

Specifications
Input: 500 ohm balanced; 5 Kohm unbalanced
Phantom: 24 VDC; IEC 61938: 2013, Filtered
Outputs (2): +4 dBu 150 ohm balanced; -10 dBv unbalanced
Frequency Response: 50 Hz to 30 kHz (± 1.5 dB)
Gain: Adjustable 35 to 65 dB
THD+N: < 0.05% (50 dB Gain)
CMRR: >50 dB (50 Hz to 20 kHz)
Residual Noise: < -70 dB (below +4 dBu 150 ohm source @ 50 dB gain)
Headroom: > 20 dB (24 VDC supply);
> 14 dB (12 VDC supply)
Phantom Power Input: 24 to 33 VDC @ 10 mA maximum
Power Requirement: GROUND-REFERENCED, 24 to 33 VDC @ 25 mA
Ambient Operating Environment: 0° C to 55° C
Dimensions: Height: 0.7 in. (1.7 cm), Width: 3 in. (7.6 cm), Depth: 1.6 in. (3.9 cm)
Package Dimensions: 2" x 2" x 4"
Shipping Weight: 0.195 lbs.


Part Numbers
MCM Part #:555-STM-2
Radio Design Labs Part #:STM-2
Package Specifications & Dimensions
Weight:0.23 lbs.
Hazardous:No
Warranty:1095 days
Need to Return?
Length:4.25 in.
Width:2.25 in.
Height:2 in.
Shipping Information
Extra Shipping Charge:No
Drop Ship:No
Catalog Pages
Catalog/Page:
MCM Cat 57, Page 149
MCM Cat 56, Page 164
View in Catalog

Product Reviews Top

Product Downloads Top

PDF Reference

Requires Adobe Acrobat Reader

Associated Products

Image of RDL Power Supply - 500mA

555-PS-24A - RDL Power Supply - 500mA

Designed specifically for use with all RDL modules. All models are single ended, 24VDC output. Output current: 500mA

In Stock

$22.99

Buy Now
Image of RDL Power Supply - 1A

555-PS-24K - RDL Power Supply - 1A

Designed specifically for use with all RDL modules. All models are single ended, 24VDC output. Output current: 1A

In Stock

$28.99

Buy Now

Others Also Bought

Image of Creep-Zit™ Fiberglass Wire Running Kit

22-2665 - Creep-Zit™ Fiberglass Wire Running Kit

The Creep-Zit is "THE TOOL" that makes conventional fish tape obsolete and has a use in every wire/cable install job. residential or commerical. Consists of highly-flexible five 6' (30' total) highly-flexible, green fiberglass rods Kit includes fou...

In Stock

$84.99

Buy Now
Image of 7 Piece Metric Hex Set

22-2798 - 7 Piece Metric Hex Set

Precision tapered handles Exact fit hardened tool steel tips Seven piece metric hex set includes: .71, .89, 1.3, 1.5, 2.0, 2.5, 3.0mm

In Stock

$22.74

Buy Now
Image of Round Hole Cutter w/Adjustable Radius Blades

22-7385 - Round Hole Cutter w/Adjustable Radius Blades

Ideal for installing ceiling speakers, recessed lighting, or any project requiring a round hole to be cut.

In Stock

$64.99

Buy Now
Take 15% your order through Tuesday using promo code EMD384. Some exclusions apply.
Take 15% your order through Tuesday using promo code EMD384. Some exclusions apply.