MCM Electronics

White Pi Face Digital Case with Camera Cutout By Raspberry Pi (2299865) MCM Part #83-15257

3 stars 4 reviews
Reg. Price: $15.99
You Save: $15.54 (97 %)
This product currently has limited stock.

The PiFace enclosure is designed to hold both the Raspberry Pi and the PiFace digital add-on board. the case is cutout to offer access to all the usual Raspberry Pi ports plus all the PiFace digital I/O ports

These case are designed for the following accessories

Raspberry Pi Board's
PiFace Diigtal Board
Pi Camera
PiNoir Camera

Specifications Top

    • Designed to house the Raspberry Pi and via clip-in grooves - no screws required !
    • All cut-outs are pre-cut into the case - no modifications are required !
    • Wall mountable
    • Supplied with four Rubber feet
    • Supplied with LED light pipes
    • Supplied with four actuators
    • High Gloss Finish
    • Thickness 3mm: HB Rated
    • Colored Materials: • High Impact Polystyrene (HIPS)
    • White Finish: Acrylic Capped ABS
    • Light Pipes: Transparent Acrylic
    Package includes
    • 2 Light Pipes
    • 4 Actuators
    • 4 Rubber feet

View the entire range
Part Numbers
MCM Part #:83-15257
Raspberry Pi Part #:2299865
Package Specifications & Dimensions
Weight:0.25 lbs.
RoHS Comp:Yes
Warranty:365 days
Need to Return?
Length:5 in.
Width:4 in.
Height:5 in.
Shipping Information
Extra Shipping Charge:No
Drop Ship:No

Product Reviews Top

  • by

    on 6/11/2014

    Need bigger version for future, versatile web appliance

    Overall: 3.5 out of 5

    I have been able to use the case to build a rudimentary web-appliance, called the Fracking Detector Kit. I could hold the Pi, and a second partial board for accepting sensor signal, data acquisition intobthe Pi.
    A bigger case, that can hold a full-sized sensor-probe, signal conditioning; as well a third, A2D board will enable a connected experimentation station, in the vein of Internet of Things applications, for education, and a whole spectrum of applications.

  • by CobyBean

    on 5/11/2014

    Hard to open first time and missing parts!

    Overall: 2.5 out of 5

    This case had protective plastic on both the outside and inside! Instructions on how to open it would of been real helpful! You can't just pull the two pieces apart. One must pry the end open first. Small tabs would of helped or even a picture demonstrating how to open. I guess you don't need or get "light pipes" with clear case but what about the actuators? I got the feet and a cracked corner but it is still functional. How is the camera cut-out used? Better documentation would be helpful!

  • by wbrouwer

    on 12/3/2013

    Quality is good.

    Overall: 4 out of 5

    Tricky to install the raspberry PI and Piface board with the supplied buttons. Ended up loosing one to the buttons as I struggled to fit everything together.

  • by scottymace

    on 9/14/2013

    Good idea, poorly implemented

    Overall: 1 out of 5

    The bottom part seems to be designed OK. The main problem with it is the poorly thought out "light pipe" design. A tiny piece of unpolished plexiglass, that you have to press-fit into a share recess, and it's dim. It's difficult to do, and doesn't stay put. The top half is a disaster. The "light pipe" for that just sits in a recess, and never stays put during assembly, (which you have to do upside down to keep everything in place. I had to superglue the pipe, because it would never stay put after assembly. Again, the pipe is unpolished, and the light is very dim. Once assembled, the sides of the top, which are spread during assembly, never seat properly, and it's very noticeable. Unfortunately this is the only case I could find for the RPI and Pi-Face, so I'll have to make do...