- Dimensions: 40.29mm / 1.58" x 28.73mm / 1.13" x 23.8mm / 0.9"
- Assembly required
- Tripod not included
- 1/4" Mounting hexnut not included
The Kit comes with two plastic pieces and 4 nylon screws with nuts, that are snapped together, The protective film should be removed prior to use. When assembling the mount, do not tighten the camera board so much as to bend the camera PCB. The mounting portion then snaps to the part holding the camera. There are two available mounting positions, at the top as shown above and at the bottom.