MCM Electronics

Mic/Line Bi-Directional Network Interface Dante By Radio Design Labs (RU-MLB4P) MCM Part #555-27675

0 stars No reviews yet
& FREE Shipping
MSRP: $876.51
You Save: $241.52 (28 %)
This item is Non Cancellable/Non Returnable
This product typically arrives at our warehouse in 17 days, once ordered.

Mic/Line Bi-Directional Network Interface
The RU-MLB4P modules are Dante audio network interface products compatible with microphones and line-level audio equipment inputs and outputs. These modules are designed to be mounted in equipment racks, closets, conference tables and on shelves or backboards in commercial/industrial installations.
The RU-MLB4P is a high quality converter that provides professional line-level outputs from four Dante network received audio channels. It also converts four professional or consumer line-level sources, or dynamic or condenser microphones to Dante network audio channels.
If PoE power and an external 24 Vdc supply are both feeding an RU-MLB2P, the unit will run from the external supply and will seamlessly switch over to PoE power upon loss of the external supply.

Note: For non-POE Version, please see 555-27670
  • See the entire line of Dante interfaces Here
  • Specifications Top

    RDL is the world's premier manufacturer of high-quality audio, video and control modules. The concept of APPLICATION-SPECIFIC MODULES was first introduced by RDL more than twenty years ago…a concept promoting unsurpassed value and performance. A concept which has attained widespread popularity and is a proven success in many thousands of facilities around the world. As the inventor of APPLICATION-SPECIFIC MODULES, RDL continues to lead the industry with solutions to specific problems as well as building blocks of quality system designs.

    • Network Connector:RJ45 with Link and Speed indicators
    • Digital Audio Ethernet Protocol:Dante
    • Transmission Rate: 100 Mbps
    • Sample Rates Supported:44.1 kHz, 48 kHz (default)
    • Bit Depth Supported:24 bits
    • Audio Operating Levels:-18 dBFS = +4 dBu
    • Mic/Line Inputs to Network Interface Section
    • Mic Inputs
    • Inputs (4):Balanced, detachable terminal block
    • Gain:Automatic; 40 dB for condenser mics, 60 dB for dynamic mics
    • Input Level for +4 dBu:-56 dBu (dynamic), -36 dBu maximum; -36 dBu (condenser), -19 dBu maximum (unclipped), -14 dBu maximum (soft clipped)
    • Input Impedance:> 1 kO
    • Phantom Power:P48, 48 Vdc
    • Standard for Phantom:IEC 61938: 2013
    • Frequency Response:20 Hz to 20 kHz (± 0.5 dB)
    • THD+N:< 0.1%
    • Noise below +4 dBu:< -70 dB
    • CMRR:> 70 dB (50 Hz to 120 Hz)
    • Crosstalk:< 70 dB (20 Hz to 20 kHz)
    • Line Inputs
    • Inputs (8):Balanced, detachable terminal block (4); Unbalanced, detachable terminal block (4)
    • Input Level for +4 dBu:+4 dBu (balanced); -10 dBV (unbalanced)
    • Input Impedance:> 20 kO
    • Frequency Response:20 Hz to 20 kHz (± 0.5 dB)
    • THD+N:< 0.1%
    • Noise below +4 dBu:< -75 dB
    • CMRR:> 60 dB (50 Hz to 120 Hz)
    • Crosstalk:< 75 dB (1 kHz, any line to any mic channel), < 70 dB (20 Hz to 20 kHz)
    • Headroom above +4 dBu:> 18 dB
    • Network to Line Level Interface Section
    • Outputs (4):Balanced, detachable terminal block
    • Output Level:+4 dBu (nominal)
    • Output Impedance:150 O balanced; 75 O unbalanced
    • Frequency Response:20 Hz to 20 kHz (± 0.5 dB)
    • THD+N:< 0.05%
    • Noise below +4 dBu:< -80 dB (output active); < -95 dB (outputs muted)
    • Crosstalk:< 85 dB (20 Hz to 20 kHz)
    • Headroom above +4 dBu:> 18 dB
    • Selectors (4):MIC or LINE (rear panel)
    • Indicators (13):Power In (1); Output Signal LEDs (4); Input Signal LEDs (4); Network Sys and Sync (2), Ethernet Link and Speed (2)
    • Power Connections (2):Power Jack; Detachable Terminal Block
    • Ambient Operating Environment:0° C to 40° C
    • Power Requirement:24 Vdc @ 180 mA plus connected phantom loads, or PoE.
    • Dimensions:5.8" x 1.7" x 5.2"
    • Weight:1.545 lbs.

    Part Numbers
    MCM Part #:555-27675
    Radio Design Labs Part #:RU-MLB4P
    Package Specifications & Dimensions
    Weight:2 lbs.
    RoHS Comp:No
    Warranty:1095 days
    Need to Return?
    Length:6.25 in.
    Width:7 in.
    Height:2.75 in.
    Shipping Information
    Extra Shipping Charge:No
    Drop Ship:No

    Product Reviews Top