MCM Electronics

Network to Format-A Interface/Distributor Dante By Radio Design Labs (RU-NFDP) MCM Part #555-27685

0 stars No reviews yet
$539.99 
& FREE Shipping
MSRP: $743.75
You Save: $203.76 (27 %)

Network to Format-A Interface/Distributor
The RU-NFDP modules are Dante audio network interface products compatible with RDL Format-A twisted pair products. These modules are designed to be mounted in equipment racks, closets, conference tables and on shelves or backboards in commercial/industrial installations.
The RU-NFDP is an RDL Format-A sender/distributor that connects to a Dante-enabled network. It converts three Dante audio channels to RDL Format-A. Each network channel corresponds to Pair A, B or C of the Format-A outputs. The unit converts a fourth Dante audio channel to a balanced line-level AUX output.
The RU-NFDP is equipped for PoE which powers the RU-NFD and Format-A receivers connected to the primary Format-A output jack. Audio is also distributed to the other two output jacks. Remote Format-A receivers connected to those other two output jacks are only powered from the RU-NFDP if an external 24 Vdc power supply is connected. If PoE power and an external 24 Vdc supply are both feeding an RU-NFDP, the unit will run from the external supply and will seamlessly switch over to PoE power upon loss of the external 24 V supply.

Note: For non-POE Version, please see 555-27680
  • See the entire line of Dante interfaces Here
  • Specifications Top

    RDL is the world's premier manufacturer of high-quality audio, video and control modules. The concept of APPLICATION-SPECIFIC MODULES was first introduced by RDL more than twenty years ago…a concept promoting unsurpassed value and performance. A concept which has attained widespread popularity and is a proven success in many thousands of facilities around the world. As the inventor of APPLICATION-SPECIFIC MODULES, RDL continues to lead the industry with solutions to specific problems as well as building blocks of quality system designs.

    Specifications
    • Network Connector:RJ45 with Link and Speed indicators
    • Digital Audio Ethernet Protocol:Dante
    • Transmission Rate: 100 Mbps
    • Sample Rates Supported:44.1 kHz, 48 kHz (default)
    • Bit Depth Supported:24 bits
    • Audio Operating Levels:-18 dBFS = +4 dBu
    • Format-A OutputsRDL Format-A RJ45 (3)
    • Format-A Signal Pairs Used (3):A, B, C (each Format-A output)
    • Frequency Response:20 Hz to 20 kHz (± 0.75 dB)
    • THD+N:< 0.1%
    • Noise below +4 dBu:< -85 dB (pair active); < -100 dB (pair muted)
    • Crosstalk:< 80 dB (20 Hz to 20 kHz)
    • Headroom above +4 dBu:> 18 dB
    • AUX Output
    • Output:Balanced, detachable terminal block
    • Output Level:+4 dBu (nominal)
    • Output Impedance:150 O balanced; 75 O unbalanced
    • Frequency Response:20 Hz to 20 kHz (± 0.5 dB)
    • THD+N:< 0.1%
    • Noise below +4 dBu:< -75 dB
    • Crosstalk:< 80 dB (20 Hz to 20 kHz)
    • Headroom above +4 dBu:> 18 dB
    • Indicators (12):Power In (1); Power Out (3); Audio Signal LEDs (4), Network Sys and Sync (2), Ethernet Link and Speed (2)
    • Power Connections (2):Power Jack; Detachable Terminal Block
    • Ambient Operating Environment:0° C to 40° C
    • Power Requirement:24 Vdc @ 120 mA plus connected loads, or POE.
    • Dimensions:5.8" x 1.7" x 5.2"
    • Weight:1.37 lbs.

    Part Numbers
    MCM Part #:555-27685
    Radio Design Labs Part #:RU-NFDP
    Package Specifications & Dimensions
    Weight:2 lbs.
    Hazardous:No
    RoHS Comp:No
    Warranty:1095 days
    Need to Return?
    Length:7 in.
    Width:6.25 in.
    Height:2.75 in.
    Shipping Information
    Extra Shipping Charge:No
    Drop Ship:No

    Product Reviews Top