SIIG’s SuperSpeed USB 3.0 to SATA 2.5" Enclosure is a cutting-edge product designed to enable SATA 2.5” hard disk drives to work with your USB 3.0 enabled desktop or notebook computer.
This slim and portable enclosure instantly adds extra storage space of up to 3TB in capacity to your system, delivers maximum data transfer rates of up to 5Gb/s (10 times faster than USB 2.0), and allows you to hot-swap the enclosure (connect and disconnect) without first turning your system off. This USB 3.0 enclosure is super easy to set up, no driver installation is required, and is an excellent mobile storage solution for transferring large volumes of data at high speed between your external SATA hard disk drive and the computer. Simply install your 2.5” SATA hard disk drive into the USB 3.0 enclosure and experience the speed of SuperSpeed USB 3.0 technology.
The SuperSpeed USB 3.0 to SATA 2.5” Enclosure is powered by ASMedia ASM1051 chip, conforms to USB 3.0 Specification, Revision 1.0, Serial ATA Specification 2.6 and USB Mass Storage Class Bulk-Only Transport. It is also FCC & CE regulatory approved and RoHS-compliant. The SuperSpeed USB 3.0 to SATA 2.5” Enclosure is fully compatible with a wide variety of Windows operating systems and backed by SIIG’s limited 5-year warranty.
- Quickly adds more storage space to your USB-enabled PC (USB 3.0 recommended)
- No driver installation required. Simply install a 2.5" SATA (3Gb/s or 1.5Gb/s) hard disk into the enclosure then connect to a USB port
- Slim and portable design
- Supports USB 3.0 data transfer rate up to 5Gb/s*
- Compliant with Universal Serial Bus 3.0 Specification
- Compliant with Serial ATA Specification 2.6
- Supports up to 3TB hard disk capacity (Note: Windows 2000, XP (32-bit), Server 2003 (32-bit) can't support more than 2TB capacity. This is an OS limitation.)
- Supports USB Mass Storage Class Bulk-Only Transport
- Supports up to 12.5 mm thick hard disk drives
- Type A, 9-pin, USB 3.0, Female, External
- Serial ATA data (7-pin) & power (15-pin), Internal
- Dimensions: 4.8" (W) x 3.1" (H) x 0.65" (D)
- Weight: 2 oz (50g)
- Color: Gray
- Certifications/Standards: FCC, CE, RoHS
- Warranty: 5 years
*Note: For maximum data throughput, use a SATA 3Gb/s hard disk with the enclosure and connect to a USB 3.0 port. Data throughput is dependent on system hardware and may be less.
- Desktop or notebook PC with an available USB 2.0/3.0 port (USB 3.0 recommended)
- Windows 7 (32-/64-bit) / Vista (32-/64-bit) / XP (32-/64-bit) / Server 2003 & 2008 (32-/64-bit)
- SuperSpeed USB 3.0 to SATA 2.5" Enclosure
- USB Y-split (data & power) cable
- Installation kit
- User's manual
|MCM Part #:||83-14042|
|Siig Part #:||JUSA0912S1|
|Package Specifications & Dimensions|
Need to Return?
|Extra Shipping Charge:||No|