MCM Electronics

Mic To Line Gated Speech Preamplifier By Radio Design Labs (ST-GSP1) MCM Part #555-18886

0 stars No reviews yet
& FREE Shipping
MSRP: $169.12
You Save: $44.13 (26 %)
This item is Non Cancellable/Non Returnable
This product is shipped directly from a warehouse separate from MCM.

Gated Speech Preamplifier - Microphone to Line

The ST-GSP1 is a gated speech preamplifier designed to be used in a variety of situations where it is desired to produce an automatically switched line-level signal from a microphone.

Specifications Top

This module may be used in conjunction with other RDL modules to configure automatic mixing systems or may be used alone as a voice-operated module. The open-collector slave output may be used to trigger other equipment or RDL modules. The versatility of ST-GSP1 applications range from complete automatic mixing system design to the addition of automatic mic gating to the inputs of conventional mixers or amplifiers.

The MIC INPUT may be wired for balanced or unbalanced operation. A phantom voltage terminal is provided for use with condenser microphones. The phantom input accepts dc voltages up to 48 Vdc and is internally filtered. The mic input gain adjustment has sufficient range to accommodate a wide range of microphones, from low-output dynamic microphones to higher-output condensers.

  • Gated Mic to Line Preamplifier
  • Speech Activated Gating
  • Fast, Silent Audio Switching
  • Integral Single-Ended Noise Reduction
  • Adjustable Gain and Threshold
  • Balanced or Unbalanced Input / Output
  • Phantom Power Provision
  • Open-Collector Logic Output

Input Impedance: 150 to 600 O balanced, 5 kO unbalanced
Switching Time: 10 ms
Off Delay: 2 seconds nominal (may be extended using external capacitor)
Control Output: Open-Collector @ 50 mA
Headroom: > 18 dB (above +4 dBu)
THD+N: < 0.030% (1 kHz)
CMRR: > 45 dB
Frequency Response: 15 Hz to 20 kHz (+/- 0.5 dB into 10 kO bridging input)
Residual Noise: < -80 dB below +4 dBu unweighted (preamp muted)
ON Gain: 45 to 65 dB (Adjustable)
Power Requirement: GROUND-REFERENCED, 24 Vdc @ 75 mA
Ambient Operating Environment: 0° C to 55° C

Part Numbers
MCM Part #:555-18886
Radio Design Labs Part #:ST-GSP1
Package Specifications & Dimensions
Weight:0.1 lbs.
RoHS Comp:Yes
Warranty:1095 days
Need to Return?
Length:4 in.
Width:2 in.
Height:2 in.
Shipping Information
Extra Shipping Charge:No
Drop Ship:No

Product Reviews Top

Associated Products

Image of 12ft Stereo Audio 2 RCA M-M    Cable

24-12043 - 12ft Stereo Audio 2 RCA M-M Cable

The Stellar Labs Value Series Stereo Audio Cables are high quality directional analog stereo interconnects ideally suited for capturing the depth and detail in your favorite music or home theater presentations. The dual conductor 90% spiral-wrapped cable helps pro...

In Stock


Buy Now
Image of 5' XLR Male to Female Cable

24-13032 - 5' XLR Male to Female Cable

These male-to-female balanced patch cables are designed to connect gear with XLR outputs with XLR inputs. They are ideal for use in touring and other live sound and stage applications.

On Backorder(Expected in 21 days)


Buy Now
Image of 49' 8 Channel Box XLR Cable Snake

555-13860 - 49' 8 Channel Box XLR Cable Snake

Eight Channel Box Cable Snake - 49' Ideal for permanent installation, stage rigs, and any PA system, this heavy-duty cable snake features a rugged metal stage box and quality 3 pin XLR connectors, and keeps microphone and instrument cable runs organized between t...

In Stock


Buy Now