MCM Electronics

HDMI over Coax Cable - RF - Frequency Agile Receiver By Stellar Labs (33-11975) MCM Part #33-11975

4.5 stars 3 reviews
$99.99 
& FREE Shipping
MSRP: $149.00
You Save: $49.01 (33 %)
Qty.Volume Price
4+$87.49

HDMI-Over-Coax Extender (receiver)
High quality, frequency agile transmitter/receiver set allows transmissions of high definition HDMI signal over standard 75ohm coaxial cable, at distances exceeding 2,000 feet. The HD signal is modulated in QAM format, on of 100 selectable frequencies, then demodulated at the other side. This allows the signal to be managed in the same manner as any RF signal, with capability to split to multiple receivers, or combine multiple transmitters set to different channels, using simple CATV splitters and combiners.

Note: Transmitter and receiver sold separately

Specifications Top

Additional Details:
This set modulates high definition A/V program material to RF, in industry standard QAM format. This unique feature allows much further cable runs, as well as tremendous flexibility when incorporating multiple HD sources or video monitors. Since standard 75Ω cable can be used, the benefit of simple cable installation and termination alone make this an ideal manner of distributing HD signals. It even allows easy integration with cable that may already be in place.

To distribute one HD source to multiple monitors, simply insert and industry standard CATV splitter and add a receiver for each set. There is enough RF signal strength to split to 16 or more sets, and still have enough power for a long length of cable.

By using industry standard splitters as combiners, you can insert multiple different HD sources onto a single coax cable, send a great distance, and split at the receiving end. Simply assign transmitters and receivers to matching channels.

Finally, in multiple set applications, each set syncs with its individual receiver. This allows each television to display the maximum resolution it is capable of, regardless of limitations of other sets in the system. This is a benefit over traditional HDMI splitters that often require the monitor of lowest resolution capability to dictate the max resolution of the entire system.

Installation Note:
This system is primarily designed for use in environments where very long length of 75 ohm cable is used. The output strength of the transmitter is +0dBm, while the level required at the receiver, for best performance, is -71 ~ -80dBm depending upon frequency used. In situations where less than 300' of cable is used, with no splitters, a 20dB attenuator is recommended. For best performance, especially in environments where multiple transmitters are used, the signal gain at the receiving end should be kept between -50 ~ -80dBm. Cable loss (chart is included in the manual) and splitter loss will need to be calculated, additional attenuators may be required. For questions, feel free to contact our technical support department.

Application Example (Sports Bar)
Your head end rack has four satellite receivers, and you have sixteen sets located around your establishment. Use a 33-11970 transmitter on each satellite receiver, use a 4x1 combiner (MCM #33-2196) to combine all four transmitters to a single cable. Set each transmitter to a channels at least 30HMz apart. Run your single coax cable to your televisions, split as needed, and place a 33-11975 receiver at each set. Determine the satellite receiver you want to view on each set, and set each 33-11975 receiver channel appropriately.

    Features:
  • Easy pushbutton channel selection
  • LED channel display (00 ~ 99)
  • H.264 video encoding
  • Compatibility with resolutions up to 1080p, 60Hz
  • Standard F connections
  • Maximum distance: 2,300 feet
  • Compatibility with all 75ohm cable including RG-11U, RG59/U, RG59 mini, and RG6/U
  • Each unit requires 5VDC/1A, AC adapters included
  • Product dimensions: 7/8" (H) x 5" (W) x 2-5/8" (D)
    Resolutions Supported:
  • 480i/P @ 60Hz
  • 576i/P @ 50Hz
  • 750i/P @ 50/60Hz
  • 1080i/P @ 50/60Hz
  • Supports HDMI graphics resolution uo to 1920 x 1080 @ 60Hz
For complete specification details, see the attached instruction manual.
Part Numbers
MCM Part #:33-11975
Stellar Labs Part #:33-11975
Package Specifications & Dimensions
Weight:0.75 lbs.
Hazardous:No
RoHS Comp:No
Warranty:365 days
Need to Return?
Length:6 in.
Width:4.75 in.
Height:3 in.
Shipping Information
Extra Shipping Charge:No
Drop Ship:No

Product Reviews Top

  • by kpackard

    on 2/1/2017

    Good HDMI video transmission

    Overall: 4 out of 5
    Value:
    Quality:

    The transmitter/receiver pair work well. I had no issues with installation and setup. The only downside for me was that it (from what I was told) cannot be mixed via an RF combiner with over-the-air VHF/UHF signals such that both sets of signals can occupy a single coax. However, it can be combined with multiple units of the same type, and merely assign the other units to another channel. This set is a winner.

  • by installpro

    on 5/24/2016

    Very good for HD video distribution

    Overall: 4.5 out of 5
    Value:
    Quality:
    Top 10 Contributor

    Installed two senders and five receivers to function as a 2x5 matrix, all works absolutely fine. Picture is solid, audio and video seem to be perfectly in sync. Can't believe it is this easy to send two HDMI feeds through one coax cable to five devices, some of which 400' away. My only observation (hence dropping one star), is that there is a small amount of latency from senders to receivers. Blu-ray, DTV, OTA television receivers and laptops work perfectly well, latency is barely noticeable and not an issue. When using with live video from a camera, latency can be a bit of a distraction for the presenter. Still, these work very well, I highly recommend and will certainly use again.

  • by kb5tdy

    on 12/1/2015

    23.978 fps

    Overall: 4.5 out of 5
    Value:
    Quality:

    I wanted to try & use these when shooting a film & need additional monitors to view what is being shot. I sent a HDMI 23.98fps signal from the transmitter to the receiver and it worked great. I did have to attenuate the signal during testing due to the straight output from the transmitter to the receiver will overload the receiver front end.. I had to reduce the signal about 10.5db to have the receiver see the image. I have not done resolution tests yet, but the image I receiver looked great on a Professional monitor.

Associated Products

Image of 6' High Speed HDMI Cable with Ethernet

24-14757 - 6' High Speed HDMI Cable with Ethernet

HDMI Cable with Ethernet Take advantage of better looking movies, faster gaming and richer audio with the latest v1.4 high speed HDMI cables.Compatible with 3D and 4K display technologies, bi-directional A/V and data connectivity. It supports faster refresh rate...

In Stock

$2.19

Buy Now
Image of High Shield Antenna 1GHz Splitter / Combiner - 2-way

33-2187 - High Shield Antenna 1GHz Splitter / Combiner - 2-way

2-Way High Frequency Splitter/Combiner This premium two-way 1GHz splitter is specifically designed for high-frequency digital communication with virtually any cable television provider, but is also perfect for television antenna and modulated signal distribution....

In Stock

$2.49

Buy Now
Image of High Shield Antenna 1GHz Splitter / Combiner - 4-way

33-2196 - High Shield Antenna 1GHz Splitter / Combiner - 4-way

4-Way High Frequency Splitter/Combiner This premium four-way 1GHz splitter is specifically designed for high-frequency digital communication with virtually any cable television provider, but is also perfect for television antenna and modulated signal distribution...

In Stock

$3.99

Buy Now

Others Also Bought

Image of HDMI over Coax Cable - RF - Frequency Agile Transmitter

33-11970 - HDMI over Coax Cable - RF - Frequency Agile Transmitter

HDMI-Over-Coax Extender (transmitter) High quality, frequency agile transmitter/receiver set allows transmissions of high definition HDMI signal over standard 75ohm coaxial cable, at distances exceeding 2,000 feet. The HD signal is modulated in QAM format, on of ...

In Stock

$99.99

Buy Now
Image of Stackable ABS 19

555-15630 - Stackable ABS 19" Rack Flight Case - 6RU

Tough & durable flight case is designed to mount 19" rack equipment such as amplifiers, effects units, signal processing units, CD players etc. Flight case features removable front & back cover with butterfly latches for easy access. Case is designed to be securel...

In Stock

$93.59

Buy Now
Image of Stackable ABS 19

555-15625 - Stackable ABS 19" Rack Flight Case - 4RU

Tough & durable flight case is designed to mount 19" rack equipment such as amplifiers, effects units, signal processing units, CD players etc. Flight case features removable front & back cover with butterfly latches for easy access. Case is designed to be securel...

In Stock

$79.99

Buy Now