MCM Electronics

3 Line Outputs Mic Preamp w/Phantom By Radio Design Labs (STM-LDA3) MCM Part #555-18900

0 stars No reviews yet
& FREE Shipping
MSRP: $224.31
You Save: $59.32 (26 %)
This item is Non Cancellable/Non Returnable
This product is shipped directly from a warehouse separate from MCM.

Studio Quality Microphone Preamplifier

The STM-LDA3 is designed for use in quality commercial sound, broadcast and recording applications. The 1.2 Kohm balanced input accepts a wide variety of microphone input levels without loading professional low-impedance microphones. A multi-turn gain trimmer allows precise output level adjustment. The output signal is available on three separate balanced line level outputs. Each output may be connected balanced or unbalanced.

Specifications Top

RDL's exclusive low-noise discrete preamplifier circuitry produces studio-quality low-noise performance in an economical preamplifier. Dynamic or condenser microphones may be used with the STM-LDA3. Standard 24V phantom is supplied to the input when the supply voltage is connected to the PHM terminal. Optimum operating level is set using RDL's unique dual-LED VU meter, located adjacent to the terminal block. A green LED illuminates at 15 dB below a +4 dBu output. The intensity of the green LED progresses from minimum to full intensity at +4 dBu. The adjacent red LED illuminates when the operating level exceeds +4. This makes the STM-LDA3 easy to set up without any external test equipment, and operating levels may be monitored at the module.

  • Studio-Quality Microphone Preamplification
  • Three Distributed Line-Level Outputs
  • Low-Noise and Low-Distortion Performance
  • Selectable Filtered Phantom Voltage
  • Adjustable Gain up to 60 dB
  • RDL's® Exclusive Dual-LED VU Metering
  • Versatility of STICK-ON® Compactness

Input: 1.2 Kohm balanced
Outputs (3): +4 dBu, 150 ohm balanced
Gain: 40 to 60 dB (25 turn adjustable)
Frequency Response: 30 Hz to 20 kHz (+/- 0.2 dB)
THD+N: < 0.1%
IMD: < 0.1%
Noise: < -70 dB (below +4 dBu @ 60 dB gain - wideband)
< -80 dB (below +4 dBu @ 50 dB gain - wideband)
Equivalent Input Noise: < -130 dB (gain + residual noise below +4 dBu)
Headroom: > 20 dB (above +4 dBu)
CMRR: > 60 dB (100 Hz to 5 kHz)
Power Requirement: GROUND-REFERENCED, 24 VDC @ 40 mA
Ambient Operating Environment: 0° C to 55° C

Part Numbers
MCM Part #:555-18900
Radio Design Labs Part #:STM-LDA3
Package Specifications & Dimensions
Weight:0.1 lbs.
RoHS Comp:Yes
Warranty:1095 days
Need to Return?
Length:4 in.
Width:2 in.
Height:2 in.
Shipping Information
Extra Shipping Charge:No
Drop Ship:No

Product Reviews Top

Associated Products

Image of 12ft Stereo Audio 2 RCA M-M    Cable

24-12043 - 12ft Stereo Audio 2 RCA M-M Cable

The Stellar Labs Value Series Stereo Audio Cables are high quality directional analog stereo interconnects ideally suited for capturing the depth and detail in your favorite music or home theater presentations. The dual conductor 90% spiral-wrapped cable helps pro...

On Backorder(Expected in 107 days)


Buy Now
Image of 5' XLR Male to Female Cable

24-13032 - 5' XLR Male to Female Cable

These male-to-female balanced patch cables are designed to connect gear with XLR outputs with XLR inputs. They are ideal for use in touring and other live sound and stage applications.

On Backorder(Expected in 21 days)


Buy Now
Image of 49' 8 Channel Box XLR Cable Snake

555-13860 - 49' 8 Channel Box XLR Cable Snake

Eight Channel Box Cable Snake - 49' Ideal for permanent installation, stage rigs, and any PA system, this heavy-duty cable snake features a rugged metal stage box and quality 3 pin XLR connectors, and keeps microphone and instrument cable runs organized between t...

In Stock


Buy Now