MCM Electronics

Multi-Function SMD Rework Station By Tenma (21-10560) MCM Part #21-10560

5 stars 3 reviews
& FREE Shipping
MSRP: $799.00
You Save: $300.00 (38 %)
This product currently has limited stock.

This multi-function SMD rework station is a great value for production, repair work, desoldering, general soldering and reworking surface mount devices with temperature-controlled hot air all in one unit. 3-in-one design saves work space and offers tool convenience.

Specifications Top

  • Selectable Fahrenheit/Centigrade temperature
  • ESD safe
  • Suitable for desoldering of SMD components
  • IC micrometer temperature control
  • Dual LED displays
  • Simple key functions

Soldering/Desoldering features:
  • Heater and sensor error detection and power cut off
  • Password enabled temperature Lock-Out feature
  • Spike Free circuitry protects voltage and current sensitive components against current and voltage spikes
  • Delayed Suction to prevent clogging up the tip
  • Lightweight and ergonomic mini handle for comfort
  • Energy saving mode resets the soldering iron temperature to 150°C and the desoldering iron to 200°C If the station is left idle for 20 minutes
  • Individually suspendable soldering functions

Hot Air features:
  • 600W heating power allows the unit to heat up quickly
  • Unit is designed for removing a variety of QFP, SOP, PLCC or SOJ chips etc. and other sensitive components
  • Heater and sensor error detection and power cut off
  • Auto-cooling design

  • Multi-Function SMD rework station
  • Desoldering iron assembly with tip
  • Soldering iron assembly with tip
  • AC Power cord with plug
  • Hot air wand
Accessories included:
  • Cleaning Kit
  • Fume extractor
  • One 0.7mm probe
  • Four piece nozzle set
  • Solder holder
  • Hot air wand holder
  • Solder and desoldering iron stands
  • Heating element for hot-air
  • Owners manual

Desoldering iron
  • Temperature range: 572°F~842°F
  • Heating element: 100~120VAC, 170W
  • Soldering iron
    • Temperature range: 302°F~896°F
    • Heating element: 100~120VAC, 100W
    • Hot air
    • Temperature range: 212°F~896°F
    • Power requirements: 100~120VAC
    • Powe Consumption: 600W
    • Overall dimensions: 7.5" x 11.5" x 4.75"
    • Fuse type:15A Fast type

    Replacement Soldering Tips:
    MCM Part # Description
    21-9380 Short conical
    21-9381 Long conical
    21-9382 Short point
    21-9383 Long point
    21-9384 0.8mm screwdriver
    21-9385 1.6mm screwdriver
    21-9386 2.4mm screwdriver
    21-9387 3.2mm screwdriver

    Replacement Desoldering Tips:
    MCM Part # Size
    21-10562 1.0mm
    21-10563 1.2mm
    21-10564 1.5mm

    Replacement Nozzles:
    MCM Part # Type Size
    72-6711 QFP 10mm x 10mm
    72-6712 QFP 11mm x 11mm
    72-6716 SOP 4.4mm x 10mm
    72-6724 Single 2.5mm
    72-6725 Single 4.4mm
    Replacement Parts:
    MCM Part# Description
    21-10556 Desoldering Gun
    21-10557 Barrel and Nut Assembly
    21-10558 Heater Assembly
    21-10559 Glass Solder Collector
    Part Numbers
    MCM Part #:21-10560
    Tenma Part #:21-10560
    Package Specifications & Dimensions
    Weight:45 lbs.
    RoHS Comp:No
    Warranty:90 days
    Need to Return?
    Length:28 in.
    Width:20.5 in.
    Height:11 in.
    Shipping Information
    Extra Shipping Charge:No
    Drop Ship:No

Product Reviews Top

  • by dmacpro91

    on 8/10/2015

    Great Rework Station

    Overall: 5 out of 5

    I've been using this station constantly for nearly 6 months and it's been great. The super fast warm-up time (around 10 seconds) is amazing. I highly recommend this product.

  • by peterstrobl

    on 4/4/2013

    Great rework station!

    Overall: 5 out of 5

    This rework station is really nice. Much heavier duty and robust than I expected. I was very pleasantly surprised. My main concern in getting a pump based vacuum desoldering station was that the suction would not be all that great, but it worked really well. I was able to desolder a large 2x10 header from a very small PCBoard where the pad was only slightly larger than the plated through hole and I desoldered it without pulling out any of the through hole plating. This would of been impossible with solder wick or those little hand desoldering pumps. The iron works nicely too, and the hot air gun is really nice, just took me a little while to understand the feature. It doesn't turn off right away because it needs to self cool for a few minutes but once it cools is turns right off.

    Some tips: The rubber seal was stuck in the glass tube in the vacuum de-soldering iron when I first got it. Probably because it was sitting on the shelf for a few months. I tried really hard to remove it by hand but it was stuck good and I was afraid I would break it. I just removed the metal and cotton then poured a few drops of olive oil in there let it soak for a while and it pulled right out. It also helps to keep the inside of the glass tube oiled with something, flux residue will not stick as badly if you do this.

    Soldering stand: The multi-function soldering stand they give you is really neat but they don't show what the plastic rod and the metal rolling pin looking thing is for. Here is what it is: put your roll of solder on the rolling pin then feed it out through the wire loop. Mount the plastic rod on the hole across from the wire loop. The plastic rod should point straight up. This makes a great holder for the glass tube when you pull it out of the desoldering iron for cleaning so you don't drop and break it. I still don't know for sure what the 2 thin wire things are, but I am going to use them to clean out desoldering tips with smaller holes. That's probably what they are for. Also, mine came with a solder fume absorber which is a suction fan with a charcoal air filter, also really heavy duty and nice, nice touch, it works well I like it!

  • by jm20200

    on 7/3/2012

    electronics Technician

    Overall: 4 out of 5

    we used MCM for all of our tooling needs

Product Downloads Top

PDF Reference

Requires Adobe Acrobat Reader

Associated Products

Image of Rosin Core Solder - 60/40 Tin/Lead - 1LB

21-1040 - Rosin Core Solder - 60/40 Tin/Lead - 1LB

Rosin Core Solder(one pound) Ideal for general purpose electronic repair and assembly use. Tin/lead formulation provides the lowest possible melting point.

In Stock


Buy Now
Image of Rosin Core Solder 60/40 Tin/Lead 6OZ.

21-1045 - Rosin Core Solder 60/40 Tin/Lead 6OZ.

Rosin Core Solder(six ounces) Ideal for general purpose electronic repair and assembly use. Tin/lead formulation provides the lowest possible melting point.

In Stock


Buy Now
Image of Replacement Brass Coil for 21-4355 Tip Cleaner

21-10550 - Replacement Brass Coil for 21-4355 Tip Cleaner

Replacement Brass Coil Replacement brass coil designed for use with our Model 21-4355, this may be used for most any soldering iron tip cleaner.

In Stock


Buy Now

Others Also Bought

Image of 100 Ft 16 AWG Automotive Zip Cord

24-1885 - 100 Ft 16 AWG Automotive Zip Cord

Multi-stranded soft bare electronic copper conductors. Insulated with 80° “GPT” automotive grade VW-1 flame retardant PVC. One conductor is all red and one conductor is all black (for polarity) in “zip cord” construction. Useful as “CB” power cord, stereo, alarm ...

In Stock


Buy Now
Image of 8

108-4562 - 8" Plenum Rated Cable Ties - Black - 100 per Bag - 50LB.

These Plenum rated cable ties are suitable for general purpose use as well as in air handling spaces making them useful in a wide range of applications. Used to secure wire bundles and harness components quickly and easily. Flexible designs lets ties slip easily...

In Stock


Buy Now