MCM Electronics

Vacuum Desoldering StationMCM Part #: 72-6340  |  Tenma Part #: 72-6340

Vacuum Desoldering Station 4.6 stars from 7 reviews.
Login to rate or review this product

Low cost temperature controlled station is ideal for all levels of board level rework and repair. Closed loop control and digital display provide accurate nozzle temperature setting, while the efficient internal pump provides vacuum action. Unit comes complete with replacement nozzle, cleaning pins, replacement filters and filter tubes. Additional replacement components and a variety of nozzles are available separately.

Product Description

  • Temperature range: 410°F~900°F
  • Heating element: 24VAC, 48W
  • Dimensions: 6" (H) x81/4" (W) x 6" (D)
  • Weight: 4.5 lbs.
  • Click here for our new nozzle cleaning pins
    Replacement Parts:
    MCM Part # Description
    72-6406 Replacement desoldering gun
    72-6407 Replacement heating element
    72-6408 Replacement glass tube
    72-6409 Filter set
    72-6411 "O" ring set
    72-6864 1.0mm nozzle
    72-6865 1.2mm nozzle
    72-6863 0.8mm nozzle
    72-6866 1.5mm nozzle
    72-6867 2.0mm nozzle

  • Product Reviews

    • "President" by scottbreeden on 12/29/2011
      Overall: 4 out of 5
      Value:
      Quality:

      Just what we needed to speed up our rework

    • "Welcome addition to the bench" by bb1300 on 12/19/2011
      Overall: 4.5 out of 5
      Value:
      Quality:

      This is my second 6340 desoldering station. I don't know how old the first one was but, when a replacement was needed i purchased another one. Easy to use and maintain with readily available consumables, I look forward to years of service from this one as well.

    • "1 year so far with great results" by norbern on 11/18/2011
      Overall: 4.5 out of 5
      Value:
      Quality:

      Never had one of these before. Always used large amounts of solder wick for the last 20 years. De-solder stations were always to expensive for my blood. But now I use this station all the time and it works great! Has paid for it's self in time and wick savings.

    • "Good Machine" by gelewis on 12/2/2010
      Overall: 4.5 out of 5
      Value:
      Quality:

      This is a really good unit for the money. I have mostly used expensive "professional" stations and I would say this is nearly as good for 1/5 the money. I use the nozzle cleaning pins (PN 72-6347) to clear the residual solder and oxides whenever it stops up, (Hey MCM they should be included with the unit.) The gun is really easy to clean and the filters are cheap. Keep it clean and it works great!

    • "Great buy" by jkennedy123 on 2/4/2010
      Overall: 5 out of 5
      Value:
      Quality:

      I have had no trouble with this unit. For the money it's a great deal and real time saver compared to solder wik.

    • "Solution for tip Clogging" by eskoog on 7/29/2009
      Overall: 5 out of 5
      Value:
      Quality:

      Clogging is a common problem with all de-soldering stations, a simple solution is replace the station iron holder with one that holds the iron in the vertical position [tip up]. As a certified PACE electronic workstation repair, I advise all my students not to use the downward iron holder. You are simply fighting gravity and it wins every time whereas tip up it works for you! A simple fix is to attach a magnet[s]to the workstation and epoxy a place of steel to the handle. Students have made several nice holders which are too difficult to explain here, get creative and you'll be doing a lot less de-clogging.

    • "Time saver" by ouxly40 on 11/18/2007
      Overall: 4.5 out of 5
      Value:
      Quality:

      This unit is much cheaper than a Hakko and does well. It's only drawback is that it clogs much too often (several times a day) and is time consuming to clean. Need better tools to remove clogs.

    • Rate It!

      Login Here to rate and review this product.

    Associated Products

    Image of Solder Aid Kit

    21-665 - Solder Aid Kit

    •Six piece kit includes heat sink, self-closing tweezers, small Phillips screwdriver, brush/scraper, pointed/slotted probe and curved point/scraper

    In Stock

    $5.49

    Buy Now
    Image of Solder Fume Extractor

    21-7960 - Solder Fume Extractor

    Solder Fume Extractor Electronic solders typically contain rosin–resin compounds and lead, which when heated may create noxious fumes. Prolonged exposure to these fumes is considered potentially harmful and may create health problems including headaches, nausea ...

    In Stock

    $40.49

    Buy Now
    Image of Replacement Desoldering Gun for 72-6340

    72-6406 - Replacement Desoldering Gun for 72-6340

    Replacement for Tenma #72-6340 and #72-6345 rework stations. 45" heat resistant cord is terminated with compatible five-pin connector. Includes 24V, 48W heating element, filters, 45" vacuum tube and 2.0mm nozzle.

    In Stock

    $47.99

    Buy Now
    Image of Replacement Heating Element

    72-6407 - Replacement Heating Element

    Replacement desoldering element for Tenma #72-6340 and #72-6345 rework stations. Four-wire design includes connections for 24V, 48W element and integral temperature sensor. Ideal for replacing damaged elements, or upgrading older stations to accept the new, shorte...

    In Stock

    $17.78

    Buy Now
    Image of Replacement Glass Tube

    72-6408 - Replacement Glass Tube

    Replacement parts for the Tenma #72-6340 and 72-6345 rework stations Glass tube measures 115/16" (L) x 13/16" (O.D.)

    In Stock

    $2.54

    Buy Now
    Image of Filter Set

    72-6409 - Filter Set

    Replacement parts for the Tenma #72-6340 and 72-6345 rework stations Filter set consists of one steel wool filter and one cotton disk filter

    In Stock

    $0.99

    Buy Now
    Image of O Ring Set

    72-6411 - O Ring Set

    Replacement parts for the Tenma #72-6340 and 72-6345 rework stations Contains two rubber "O" rings, each 13/16" (O.D.)

    In Stock

    $0.99

    Buy Now
    Image of 0.8mm Replacement Nozzle

    72-6863 - 0.8mm Replacement Nozzle

    Replacement parts designed specifically for use with the Tenma #72-6340 and #72-6345 rework stations. Sizes are available with tip diameters from 0.8mm~2.0mm. Overall length of all nozzles is 7/16". Note: Desoldering stations with heating elements utilizing ol...

    In Stock

    $4.59

    Buy Now
    Image of 1.0mm Replacement Nozzle

    72-6864 - 1.0mm Replacement Nozzle

    Replacement parts designed specifically for use with the Tenma #72-6340 and #72-6345 rework stations. Sizes are available with tip diameters from 0.8mm~2.0mm. Overall length of all nozzles is 7/16". Note: Desoldering stations with heating elements utilizing ol...

    In Stock

    $4.99

    Buy Now
    Image of 1.2mm Replacement Nozzle

    72-6865 - 1.2mm Replacement Nozzle

    Replacement parts designed specifically for use with the Tenma #72-6340 and #72-6345 rework stations. Sizes are available with tip diameters from 0.8mm~2.0mm. Overall length of all nozzles is 7/16". Note: Desoldering stations with heating elements utilizing ol...

    In Stock

    $4.89

    Buy Now
    Image of 1.5mm Replacement Nozzle

    72-6866 - 1.5mm Replacement Nozzle

    Replacement parts designed specifically for use with the Tenma #72-6340 and #72-6345 rework stations. Sizes are available with tip diameters from 0.8mm~2.0mm. Overall length of all nozzles is 7/16". Note: Desoldering stations with heating elements utilizing ol...

    In Stock

    $4.59

    Buy Now
    Image of 2.0mm Replacement Nozzle

    72-6867 - 2.0mm Replacement Nozzle

    Replacement parts designed specifically for use with the Tenma #72-6340 and #72-6345 rework stations. Sizes are available with tip diameters from 0.8mm~2.0mm. Overall length of all nozzles is 7/16". Note: Desoldering stations with heating elements utilizing ol...

    In Stock

    $4.48

    Buy Now
    Image of Rounded Head Tip Cleaner

    94-782 - Rounded Head Tip Cleaner

    The HAKKO 599B cleans your soldering iron tips without water! The 599B is made from coils of brass, which is softer than the tip plating yet harder than the oxidation that forms on the tip. To clean the tip, simply plunge (stab) the iron tip into the coils. The 59...

    In Stock

    $10.89

    Buy Now

    Others Also Bought

    Image of Filter Set

    72-6409 - Filter Set

    Replacement parts for the Tenma #72-6340 and 72-6345 rework stations Filter set consists of one steel wool filter and one cotton disk filter

    In Stock

    $0.99

    Buy Now
    Image of Nozzle Cleaning Pins for Tenma 72-6340 & 72-6345 Desoldering Station

    72-6347 - Nozzle Cleaning Pins for Tenma 72-6340 & 72-6345 Desoldering Station

    Rigid steel cleaning pins, the same as those included with the Tenma 72-6340 and 72-6345 desoldering stations. Includes a set of three: 0.7mm, 1.0mm and 1.2mm diameter

    In Stock

    $10.99

    Buy Now
    Image of 1.2mm Replacement Nozzle

    72-6865 - 1.2mm Replacement Nozzle

    Replacement parts designed specifically for use with the Tenma #72-6340 and #72-6345 rework stations. Sizes are available with tip diameters from 0.8mm~2.0mm. Overall length of all nozzles is 7/16". Note: Desoldering stations with heating elements utilizing ol...

    In Stock

    $4.89

    Buy Now
    Package Specifications & Dimensions
    Weight:11 lbs.
    Hazardous:No
    RoHS Comp:Yes
    Warranty:365 days
    Need to Return?
    Length:11.25 in.
    Width:14.5 in.
    Height:7.25 in.
    Shipping Information
    Extra Shipping Charge:No
    Drop Ship:No
    Catalog Pages
    Catalog/Page:

    MCM Cat 57, Page 1143

    MCM Cat 56, Page 971

    PDF Reference

    Requires Adobe Acrobat Reader.

    Mfr. Info

    Tenma Logo
    Mfr. Name:Tenma
    Mfr. Part Number:72-6340