MCM Electronics

Heavy Duty 60 Amp Switch Mode Power SupplyMCM Part #: 72-7655  |  Tenma Part #: 72-7655

Heavy Duty 60 Amp Switch Mode Power Supply 4.8 stars from 2 reviews.
Login to rate or review this product

Heavy Duty 60 Amp Switch Mode Power Supply
High current supply is fully adjustable from 1~15VDC, making it suitable for communications racks, ham radio stations, autosound display and servicing. Remote sensing input allows output voltage to be measured externally, ideal when the load is located some distance from the power supply. Efficient switch mode design provides very high output current in a compact lightweight package.

Product Description

Temperature controlled, variable speed fan cooling ensures quiet, reliable long–term operation. Dual LED digital display simultaneously shows output voltage and current. Output voltage is adjusted via front panel control, external 5Kohm potentiometer (MCM #28-0678 not included), or external 0~5VDC control source.

  • Front panel banana jacks provide convenient access for loads up to 5A
  • Rear panel 3/8" posts accept banana plugs, ring terminals or spade lugs for loads up to 60A
  • Remote voltage control
  • Remote sensing
  • Large 5/8" high LED digits
  • Display resolution to 0.1V, 0.1A
  • Excellent load and line regulation
  • Low ripple and noise
  • Over-voltage, overload, temperature and short circuit protection
  • Detachable IEC power cord
  • Output Voltage: 1~15VDC
  • Output Current: 60A
  • Load regulation: 0.1% +5mV
  • Line regulation: 0.05% +3mV
  • Ripple and noise: 40mV (p-p)
  • Efficiency: 85%
  • Meter accuracy: ±1% +1 count
  • Power requirements: 120VAC, 60Hz
  • Dimensions: 4-1/4" (H) x 8-3/4" (W) x 14-1/4" (D)
  • Weight: 12.8 lbs.

Product Reviews

  • "Power supply" by Ronald Bageant on 10/22/2012
    Overall: 5 out of 5

    just one word, great

  • "Amazing power for the price" by Analogboi on 9/14/2009
    Overall: 4.5 out of 5

    I was skeptical about this power supply because the price is quite a bit lower than its nearest competitors. I own two of these and am very happy with them. The display is bright and accurate, the binding posts are sturdy, the fan is quiet, and the voltage control is smooth. I have had both deliver about 50 amps at 12.6Vdc for well over an hour and the air from the fan was only warm (room where the power supplies were located was about 80 degrees F). The power supply cabinet remained cool to the touch. If you need lots of amps I recommend these!

  • Rate It!

    Login Here to rate and review this product.

Associated Products

Image of Oscilloscope/Test Equipment Cart

21-1925 - Oscilloscope/Test Equipment Cart

•Slanted top allows technician to view equipment at a convenient angle •Lower shelf for storage •Heavy-duty casters •Adjustable back support with bumpers prevents damage to equipment •Gray •

In Stock


Buy Now
Image of Multiple Outlet DC Power Strip

72-6627 - Multiple Outlet DC Power Strip

Multiple Outlet DC Power Strip This multiple outlet high-current terminal strip the perfect accessory to any bench top power supply, especially when a number of permanent items are connected, while others are routinely added and removed. Intended for the service ...

In Stock


Buy Now
Image of Multi-Network and Modular Cable Tester

72-6706 - Multi-Network and Modular Cable Tester

Network Cable Tester The Tenma Multi-Network and Modular Cable Tester easily reads the correct pin configuration of 10Base-T cable (Category 5, 5e and 6), 10Base-2 cable (coax), RJ-45 and RJ-11 modular cables, 356A, TIA-568A/568B and Token Ring cable by comparing...

In Stock


Buy Now

Others Also Bought

Image of 6

21-14610 - 6" PCB Reference Ruler

The first time you soldered up a surface mount component you may have been surprised "these are really small parts!" and there's dozens of different names too! QFN, TDFN, SOIC, SOP, J-Lead, what do they mean and how can you tell how big they are? Now you can have ...

In Stock


Buy Now
Image of Ceramic Resistor - 100 Watt / 8 Ohm

28-048 - Ceramic Resistor - 100 Watt / 8 Ohm

RESISTOR 100W 8 OHM AUDIO DUMY LOAD Audio Dummy Loads, Power: 100 W, Resistance: 8 ohm, Features: Non-inductive load for bench testing amplifiers

In Stock


Buy Now
Image of 2-in-1 Intelligent SMD Rework Station

21-10130 - 2-in-1 Intelligent SMD Rework Station

The 21-10130 is intelligent rework station which combines rework station with soldering station to become an essential centerpiece of any technician or hobbyist bench. It is easy to operate, user friendly, and space saving. A MCU thermostat provides accurate and c...

In Stock


Buy Now
Package Specifications & Dimensions
Weight:13 lbs.
Warranty:365 days
Need to Return?
Length:18.5 in.
Width:11.75 in.
Height:7 in.
Shipping Information
Extra Shipping Charge:No
Drop Ship:No
Catalog Pages

MCM Cat 57, Page 1267

MCM Cat 56, Page 1104

PDF Reference

Requires Adobe Acrobat Reader.

Mfr. Info

Tenma Logo
Mfr. Name:Tenma
Mfr. Part Number:72-7655