MCM Electronics

Combination Network Cable Tester with Digital MultimeterMCM Part #: 72-8495  |  Tenma Part #: 72-8495

Combination Network Cable Tester with Digital Multimeter 4.7 stars from 3 reviews.
Login to rate or review this product

Combination Multimeter and Network Cable Tester
Compact 2-in-1 unit provides standard digital multimeter functions, as well as tests proper pin configurations on network and voice cables. Provides sequential verification of each pin on a network cable, and included remote terminator allows testing of cables already installed in a structure. Digital multimeter measures AC/DC volts and amps, resistance and diodes, and provides audible continuity test.

Product Description

  • 2,000 count display
  • Verifies correct wiring of RJ-45, RJ11, RJ12 and BNC network cables
  • Autoranging multimeter functions
  • Rugged overmolded housing
  • Selectable auto/manual range selection
  • Max hold
  • Data hold
  • Selectable continuity beep
  • Requires 9V and (2) AA batteries (not included)
  • Includes test leads, BNC network cable adaptors, zipper carry case and owners manual
  • Continuity: Buzzer sounds at less than 150Ω
  • Input impedance: 7.5MΩ
    See other low cost Tenma Cable Installation Testers

    Range
  • DC voltage: 200mV, 2V, 20V, 200V, 600V
  • AC voltage: 2V, 20V, 200V, 600V
  • DC current: 200µA, 2000µA, 20mA, 200mA
  • AC current: 200µA, 2000µA, 20mA, 200mA
  • Resistance: 200Ω, 2KΩ, 200KΩ, 2MΩ, 20MΩ

    Best Accuracy
  • DC voltage: ±0.5% +3 digits
  • AC voltage: ±1.0% +5 digits
  • DC current: ±1.5% +3 digits
  • AC current: ±1.8% +3 digits
  • Resistance: ±1.2% +5 digits

  • Product Reviews

    • "LAN tester with free multimeter!" by rfglase on 1/9/2012
      Overall: 4.5 out of 5
      Value:
      Quality:
      Top 25 Contributor

      Went looking for a LAN tester and found this at a lower price than others plus has a multimeter. Seems well constructed and has all the accessories including a carring case. Only negative so far is that the multimeter probes have very short tips, good for circuit boards but too short for AC outlets or for probing connectors.

    • "Better remove the batteries for transport..." by delinth on 2/20/2010
      Overall: 4.5 out of 5
      Value:
      Quality:
      Top 10 Contributor

      The unit is solidly constructed and works as advertised, but the ON/OFF button choice for the modular cable tester section would have netted an aspiring engineer a failing grade. The button should have been recessed or should have been exchanged for a toggle switch. It is far, far too easy for the cable tester to be accidentally energized while stored inside the included case if you leave the batteries installed. Otherwise, a good value, and I would still buy it.

    • "works great" by spider250 on 10/2/2009
      Overall: 5 out of 5
      Value:
      Quality:

      Only needed it for the cable tester, for 40 bucks, that would have been enough. The meter was just an added bonus. Nice to confirm that AC is off when working around wiring. I love it.

    • Rate It!

      Login Here to rate and review this product.

    Associated Products

    Image of Heavy-Duty Aluminum Tool Case

    22-8120 - Heavy-Duty Aluminum Tool Case

    Made of lightweight durable aluminum One tool holding pallet Base of unit features adjustable compartments to easily carry hand tools, small soldering equipment, hand held test equipment, and more

    In Stock

    $34.99

    Buy Now

    Others Also Bought

    Image of Cantilever Mount for Flat Panel Televisions 32''~42'' - 100lb. Capacity

    50-9530 - Cantilever Mount for Flat Panel Televisions 32''~42'' - 100lb. Capacity

    Cantilever Flat Panel Television Mount: Perfect for a wide variety of screen sizes, this rugged monitor arm mounts to a single wall stud, and supports up to 100 lbs. It will swivel at the wall and mid arm, providing a wide range of movement, and tilts up to 15 ...

    Limited Stock

    $119.99

    Buy Now
    Sale Price:
    $39.99 
    MSRP: $99.99
    You Save: $60.00 (60 %)
    or Notify me when in stock
    Notify me when in stock
    Send me promotional emails
    Package Specifications & Dimensions
    Weight:1.38 lbs.
    Hazardous:No
    Warranty:365 days
    Need to Return?
    Length:10 in.
    Width:5.25 in.
    Height:3.25 in.
    Shipping Information
    Extra Shipping Charge:No
    Drop Ship:No
    Catalog Pages
    Catalog/Page:

    MCM Cat 57, Page 1234

    MCM Cat 56, Page 1124

    Mfr. Info

    Tenma Logo
    Mfr. Name:Tenma
    Mfr. Part Number:72-8495