MCM Electronics

Infrared Repeater Kit for HDMI Cable By Vanco (280700) MCM Part #50-14620

4 stars 1 review
$39.99 
MSRP: $78.62
You Save: $38.63 (49 %)
Qty.Volume Price
4+$34.99

Infrared Repeater Kit for HDMI Cable
Complete repeater kit provides a path for IR signals over existing HDMI cable. Simply attach the inline HDMI/IR adapters to each end of the HDMI cable, and plug in the corresponding IR target and IR receiver. It is that simple.

It is perfect for flat panel televisions having video source components located elsewhere in a cabinet or behind a wall. This system is powered via the 5VDC source located on the HDMI cable, no external power source required.

Specifications Top

    System Includes:
  • Two HDMI/IR adapters - HDMI male to female with 3.5mm IR input
  • IR target with 3.5mm plug
  • IR emitter with 3.5mm plug
    Features:
  • Allows for IR Control over any HDMI Cable
  • IR target connects to HDMI/IR adapter at the television set
  • IR emitter connects to HDMI/IR adapter at the video source
  • Works with any length of HDMI cable
  • Supports 38KHz IR control signals
  • IR or CEC selectable

  • Note: Not for use with HDMI cables having active repeaters

Part Numbers
MCM Part #:50-14620
Vanco Part #:280700
Package Specifications & Dimensions
Weight:0.009 lbs.
Hazardous:No
RoHS Comp:Yes
Warranty:365 days
Need to Return?
Length:8 in.
Width:4.75 in.
Height:1.5 in.
Shipping Information
Extra Shipping Charge:No
Drop Ship:No
Catalog Pages
Catalog/Page:
MCM Cat 57, Page 302
View in Catalog

Product Reviews Top

  • by FrankSillag

    on 4/27/2015

    Good product, but one design flaw.

    Overall: 4 out of 5
    Value:
    Quality:

    I bought and installed two of the 50-14620 IR over HDMI repeaters.
    The repeaters are easy to set up and work very well.
    There is one significant design flaw. The cable from the IR receiver or transmitter plugs into one side of the connector that inserts the signal in the HDMI line. The plug interferes with any other connector next to it.
    Specifically, when used with a 33-12710 HDMI splitter, the IR transmitter plug sticks out right where the power supply plug for the splitter is. The less than satisfactory solution is a HDMI female to female coupler and a male to male cable to extend the IR repeater away from the splitter. There would be the same problem if the IR repeater were pluged into any video component with a row of HDMI jacks.